Finding ID | Version | Rule ID | IA Controls | Severity |
---|---|---|---|---|
V-254051 | JUEX-RT-000790 | SV-254051r844263_rule | Medium |
Description |
---|
Real-time multicast traffic can entail multiple large flows of data. Large unicast flows tend to be fairly isolated (i.e., someone downloading a file here or there), whereas multicast can have broader impact on bandwidth consumption, resulting in extreme network congestion. Hence, it is imperative that there is multicast admission control to restrict which multicast groups hosts are allowed to join via IGMP or MLD. |
STIG | Date |
---|---|
Juniper EX Series Switches Router Security Technical Implementation Guide | 2024-06-10 |
Check Text ( C-57503r844184_chk ) |
---|
Review the configuration of the DR to verify that it is filtering IGMP or MLD report messages, allowing hosts to only join multicast groups from sources that have been approved. Note: This requirement is only applicable to Source Specific Multicast (SSM) implementation. [edit policy-options] policy-statement term unauth-sources { from { source-address-filter } then reject; } term allow-others { then accept; } } policy-statement term unauth-sources { from { source-address-filter } then reject; } term allow-others { then accept; } } [edit protocols] igmp { interface group-policy } } mld { interface group-policy } } If the DR is not filtering IGMP or MLD report messages, this is a finding. |
Fix Text (F-57454r844185_fix) |
---|
Configure the DR to filter the IGMP and MLD report messages to allow hosts to join only those multicast groups from sources that have been approved. set policy-options policy-statement set policy-options policy-statement set policy-options policy-statement set policy-options policy-statement set policy-options policy-statement set policy-options policy-statement set protocols igmp interface set protocols mld interface |