Finding ID | Version | Rule ID | IA Controls | Severity |
---|---|---|---|---|
V-253920 | JUEX-NM-000430 | SV-253920r879746_rule | Medium |
Description |
---|
The loss of connectivity to a particular authoritative time source will result in the loss of time synchronization (free-run mode) and increasingly inaccurate time stamps on audit events and other functions. Multiple time sources provide redundancy by including a secondary source. Time synchronization is usually a hierarchy; clients synchronize time to a local source while that source synchronizes its time to a more accurate source. The network device must utilize an authoritative time server and/or be configured to use redundant authoritative time sources. This requirement is related to the comparison done in CCI-001891. DoD-approved solutions consist of a combination of a primary and secondary time source using a combination or multiple instances of the following: A time server designated for the appropriate DoD network (NIPRNet/SIPRNet); United States Naval Observatory (USNO) time servers; and/or the Global Positioning System (GPS). The secondary time source must be located in a different geographic region than the primary time source. |
STIG | Date |
---|---|
Juniper EX Series Switches Network Device Management Security Technical Implementation Guide | 2023-03-23 |
Check Text ( C-57372r843791_chk ) |
---|
Determine if the network device is configured to synchronize internal information system clocks with the primary and secondary time sources. Verify the Network Time Protocol (NTP) configuration. [edit system ntp] authentication-key 1 type sha256 value "PSK"; ## SECRET-DATA authentication-key 2 type sha1 value "PSK"; ## SECRET-DATA server key 1 prefer; ## SECRET-DATA server key 2; ## SECRET-DATA trusted-key [ 1 2 ]; source-address If the network device is not configured to synchronize internal information system clocks with the primary and secondary time sources, this is a finding. |
Fix Text (F-57323r843792_fix) |
---|
Configure the network device to synchronize internal information system clocks with the primary and secondary time sources. set system ntp authentication-key 1 type sha256 set system ntp authentication-key 1 value "PSK" set system ntp authentication-key 2 type sha1 set system ntp authentication-key 2 value "PSK" set system ntp server key 1 set system ntp server prefer set system ntp server key 2 set system ntp trusted-key 1 set system ntp trusted-key 2 set system ntp source-address |