The network device must use its loopback or OOB management interface address as the source address when originating authentication services traffic.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-14672	NET0897	SV-15336r3_rule	ECSC-1	Low

Description

Using a loopback address as the source address offers a multitude of uses for security, access, management, and scalability of routers. It is easier to construct appropriate ingress filters for router management plane traffic destined to the network management subnet since the source addresses will be from the range used for loopback interfaces instead of a larger range of addresses used for physical interfaces. Log information recorded by authentication and syslog servers will record the router's loopback address instead of the numerous physical interface addresses. TACACS+, RADIUS messages sent to management servers should use the loopback address as the source address.

STIG	Date
IPSec VPN Gateway Security Technical Implementation Guide	2016-09-28

Details

Check Text ( C-12802r5_chk )
Review the device configuration and determine if authentication services are using the loopback or OOB management interface as the source address. If the loopback or OOB management interface isn't being used as the source address for authentications services, this is a finding.

Fix Text (F-14134r5_fix)
Configure the device to use its loopback or OOB management interface address as the source address when originating authentication services traffic.