UCF STIG Viewer Logo

IBM z/OS SMF recording options for the SSH daemon must be configured to write SMF records for all eligible events.


Overview

Finding ID Version Rule ID IA Controls Severity
V-224054 TSS0-SS-000010 SV-224054r561402_rule Medium
Description
SMF data collection is the basic unit of tracking of all system functions and actions. Included in this tracking data are the audit trails from each of the ACPs. If the control options for the recording of this tracking are not properly maintained, then accountability cannot be monitored, and its use in the execution of a contingency plan could be compromised. Satisfies: SRG-OS-000032-GPOS-00013, SRG-OS-000392-GPOS-00172
STIG Date
IBM z/OS TSS Security Technical Implementation Guide 2022-01-05

Details

Check Text ( C-25727r516561_chk )
Refer to the Profile configuration file specified on the PROFILE DD statement in the TCPIP started task JCL.

If the following configuration statement settings are in effect in the TCP/IP Profile configuration data set, this is not a finding.

NOTE: If the INCLUDE statement is coded in the TCP/IP Profile configuration data set, the data set specified on this statement must be checked for the following items as well.

-The TELNETPARMS SMFINIT statement is coded with the TYPE119 operand within each TELNETPARMS statement block.
-The TELNETPARMS SMFTERM statement is coded with the TYPE119 operand within each TELNETPARMS statement block.

Note: The SMFINIT and SMFTERM statement can appear in both TELNETGLOBAL and TELNETPARM statement blocks. If duplicate statements appear in the TELNETGLOBALS, TELNETPARMS, Telnet uses the last valid statement that was specified.
Fix Text (F-25715r516562_fix)
Configure the TELNETPARMS SMFINIT and SMFTERM statements in the PROFILE.TCPIP file to conform to the requirements specified below.

NOTE: If the INCLUDE statement is coded in the TCP/IP Profile configuration file, the data set specified on this statement must be checked for the following items as well.

-The TELNETPARMS SMFINIT statement is coded with the TYPE119 operand within each TELNETPARMS statement block.
-The TELNETPARMS SMFTERM statement is coded with the TYPE119 operand within each TELNETPARMS statement block.

Note: The SMFINIT and SMFTERM statement can appear in both TELNETGLOBAL and TELNETPARM statement blocks. If duplicate statements appear in the TELNETGLOBALS, TELNETPARMS, Telnet uses the last valid statement that was specified.