UCF STIG Viewer Logo

The DataPower Gateway providing user authentication intermediary services using PKI-based user authentication must only accept end entity certificates issued by DoD PKI or DoD-approved PKI Certification Authorities (CAs) for the establishment of protected sessions.


Overview

Finding ID Version Rule ID IA Controls Severity
V-65269 WSDP-AG-000098 SV-79759r1_rule Medium
Description
Non-DoD approved PKIs have not been evaluated to ensure that they have security controls and identity vetting procedures in place which are sufficient for DoD systems to rely on the identity asserted in the certificate. PKIs lacking sufficient security controls and identity vetting procedures risk being compromised and issuing certificates that enable adversaries to impersonate legitimate users. The authoritative list of DoD-approved PKIs is published at http://iase.disa.mil/pki-pke/interoperability. DoD-approved PKI CAs may include Category I, II, and III certificates. Category I DoD-Approved External PKIs are PIV issuers. Category II DoD-Approved External PKIs are Non-Federal Agency PKIs cross certified with the Federal Bridge Certification Authority (FBCA). Category III DoD-Approved External PKIs are Foreign, Allied, or Coalition Partner PKIs. Deploying the ALG with TLS enabled will require the installation of DoD and/or DoD-Approved CA certificates in the trusted root certificate store of each proxy to be used for TLS traffic. This requirement focuses on communications protection for the application session rather than for the network packet.
STIG Date
IBM DataPower ALG Security Technical Implementation Guide 2016-01-21

Details

Check Text ( C-65897r1_chk )
Type “Validation Credential” in the nav search. Verify that ValCred has only DoD certs. If ValCred does not contain DoD certs, this is a finding.

Check config of active SSL Proxy Profiles to ensure use of ValCred. If SSL Proxy does not contain a ValCred, this is a finding.
Fix Text (F-71209r1_fix)
Type “Validation Credential” in search bar. Create ValCred with only DoD certs. When creating SSL Proxy Profiles, require mutual authentication; then use ValCred with only DoD certs.