The storage system must only be operated in conjunction with an Active Directory server in a trusted environment if an LDAP server is not available.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-237827	HP3P-32-001507	SV-237827r647890_rule		High

Description
Where strong account and password management capabilities are required, the 3PAR system is heavily dependent on its ability to use an AD server. Satisfies: SRG-OS-000001-GPOS-00001, SRG-OS-000104-GPOS-00051, SRG-OS-000480-GPOS-00227

STIG	Date
HPE 3PAR StoreServ 3.2.x Security Technical Implementation Guide	2021-11-23

Details

Check Text ( C-41037r647888_chk )

Determine if the system is configured for Active Directory (AD). Enter the following command: cli% showauthparam If the result returns an error, this is a finding. If the resulting output does include the parameters "groups-dn", "group-obj", or "group-name-attr" then the host is setup for LDAP, this requirement is not applicable. If the host is setup for Active Directory and these fields in the output are not configured, this is a finding. ldap-server ldap-server-hn Next, verify that the AD authentication is operational by entering the following command: cli% checkpassword : password: If the username and password used in checkpassword are known to be valid AD credentials, and the following text is NOT displayed at the end of the resulting output, this is a finding. user is authenticated and authorized Note: The "checkpassword" command will not display authenticated information even if AD is properly configured, if the username and password are not entered correctly.

Fix Text (F-40996r647889_fix)

Use this series of commands to configure the host to use Active Directory: cli% setauthparam -f ldap-server cli% setauthparam -f binding simple cli% setauthparam -f ldap-StartTLS require cli% setauthparam -f Kerberos-realm cli% setauthparam -f ldap-server-hn cli% setauthparam -f accounts-dn CN=Users,DC=win2k12forest,DC=thisdomain,DC=com cli% setauthparam -f user-dn-base CN=Users,DC=win2k12forest,DC=thisdomain,DC=com cli% setauthparam -f user-attr WIN2K12FOREST\\ cli% setauthparam -f account-obj user cli% setauthparam -f account-name-attr sAMAccountName cli% setauthparam -f memberof-attr memberOf cli% setauthparam -f browse-map "CN=,CN=Users,DC=win2k12forest,DC=thisdomain,DC=com" cli% setauthparam -f edit-map "CN=,CN=Users,DC=win2k12forest,DC=thisdomain,DC=com" cli% setauthparam -f service-map "CN=,CN=Users,DC=win2k12forest,DC=thisdomain,DC=com" cli% setauthparam -f super-map "CN=,CN=Users,DC=win2k12forest,DC=thisdomain,DC=com"