SSMC web server must generate information to be used by external applications or entities to monitor and control remote access.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-255257	SSMC-WS-010080	SV-255257r879521_rule		Medium

Description

Remote access to the web server is any access that communicates through an external, non-organization-controlled network. Remote access can be used to access hosted applications or to perform management functions. By providing remote access information to an external monitoring system, the organization can monitor for cyber attacks and monitor compliance with remote access policies. The organization can also look at data organization wide and determine an attack or anomaly is occurring on the organization which might not be noticed if the data were kept local to the web server. Examples of external applications used to monitor or control access would be audit log monitoring systems, dynamic firewalls, or infrastructure monitoring systems. Satisfies: SRG-APP-000016-WSR-000005, SRG-APP-000358-WSR-000163, SRG-APP-000358-WSR-000063, SRG-APP-000125-WSR-000071

STIG	Date
HPE 3PAR SSMC Web Server Security Technical Implementation Guide	2023-05-17

Details

Check Text ( C-58870r869938_chk )
Verify that SSMC monitors remote access by enabling exports to a remote syslog server with the following command: $ sudo /ssmc/bin/config_security.sh -o remote_syslog_appliance -a status | sed 1q Remote syslog service status is OK If the output does not read "Remote syslog service status is OK", this is a finding.

Fix Text (F-58814r869939_fix)

Configure SSMC to be monitored for remote access by enabling exports to a remote syslog server: 1. Configure rsyslog parameters in /ssmc/conf/security_config.properties like below (use vi editor): ssmc.rsyslog.server.host= ssmc.rsyslog.server.port= ssmc.rsyslog.server.protocol=tcp ssmc.rsyslog.server.tls-enabled=1 ssmc.rsyslog.cert.caroot= ssmc.rsyslog.cert.clientcert= ssmc.rsyslog.cert.clientkey= ssmc.rsyslog.server.authMode= ssmc.rsyslog.server.permittedPeers= ssmc.rsyslog.server.device= ssmc.rsyslog.queue.maxdiskspace=6 ssmc.rsyslog.smtp.alert=true ssmc.rsyslog.smtp.server= ssmc.rsyslog.smtp.port= ssmc.rsyslog.smtp.recipient=["id1@domain","id2@domain"] ssmc.rsyslog.smtp.notify-interval=300 ssmc.rsyslog.smtp.mailFrom=id@domain 2. Execute "sudo /ssmc/bin/config_security.sh -o remote_syslog_appliance -a set -f" to commit the configuration and enable the service.