The HP FlexFabric Switch must protect an enclave connected to an Alternate Gateway by using an inbound filter that only permits packets with destination addresses within the sites address space.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-66101	HFFS-RT-000003	SV-80591r1_rule		High

Description
Enclaves with Alternate Gateway (AG) connections must take additional steps to ensure there is no compromise on the enclave network or NIPRNet. Without verifying the destination address of traffic coming from the site's AG, the perimeter router could be routing transit data from the Internet into the NIPRNet. This could also make the perimeter router vulnerable to a DoS attack as well as provide a backdoor into the NIPRNet. The DoD enclave must ensure the ingress filter applied to external interfaces on a perimeter router connecting to an AG is secure through filters permitting packets with a destination address belonging to the DoD enclave's address block.

Description

Enclaves with Alternate Gateway (AG) connections must take additional steps to ensure there is no compromise on the enclave network or NIPRNet. Without verifying the destination address of traffic coming from the site's AG, the perimeter router could be routing transit data from the Internet into the NIPRNet. This could also make the perimeter router vulnerable to a DoS attack as well as provide a backdoor into the NIPRNet. The DoD enclave must ensure the ingress filter applied to external interfaces on a perimeter router connecting to an AG is secure through filters permitting packets with a destination address belonging to the DoD enclave's address block.

STIG	Date
HP FlexFabric Switch RTR Security Technical Implementation Guide	2016-02-26

Details

Check Text ( C-66747r1_chk )
Review the configuration of each HP FlexFabric Switch interface connecting to an Alternate Gateway. Verify that the ACL configured to block unauthorized networks are configured on the interface. Verify each permit statement of the ingress filter only permits packets with destination addresses of the site's NIPRNet address space or a destination address belonging to the address block assigned by the Alternate Gateway network service provider. If the ACL is not configured to only permit packets with destination addresses within the sites address space, this is a finding. [HP]display interface gig0/1 interface GigabitEthernet0/1 port link-mode route ip address 192.168.10.1 255.255.255.0 packet-filter 3010 inbound

Check Text ( C-66747r1_chk )

Review the configuration of each HP FlexFabric Switch interface connecting to an Alternate Gateway.

Verify that the ACL configured to block unauthorized networks are configured on the interface.

Verify each permit statement of the ingress filter only permits packets with destination addresses of the site's NIPRNet address space or a destination address belonging to the address block assigned by the Alternate Gateway network service provider.

If the ACL is not configured to only permit packets with destination addresses within the sites address space, this is a finding.

[HP]display interface gig0/1

interface GigabitEthernet0/1
port link-mode route
ip address 192.168.10.1 255.255.255.0
packet-filter 3010 inbound

Fix Text (F-72177r1_fix)
Configure the ingress filter of the perimeter HP FlexFabric Switch connected to an Alternate Gateway to only permit packets with destination addresses of the site's NIPRNet address space or a destination address belonging to the address block assigned by the Alternate Gateway network service provider. [HP] acl advanced 3010 [HP-acl-ipv4-adv-3010] rule 1 permit ip destination 192.168.1.0 0.0.0.255 [HP-acl-ipv4-adv-3010] rule 2 permit ip destination 192.168.2.0 0.0.0.255 [HP-acl-ipv4-adv-3010] rule 3 permit ip destination 192.168.3.0 0.0.0.255 [HP-acl-ipv4-adv-3010] rule 4 permit ip destination 192.168.4.0 0.0.0.255 [HP-acl-ipv4-adv-3010] rule 5 deny ip destination any [HP] interface gig0/1 [HP-GigabitEthernet0/1] packet-filter 3010 inbound

Fix Text (F-72177r1_fix)

Configure the ingress filter of the perimeter HP FlexFabric Switch connected to an Alternate Gateway to only permit packets with destination addresses of the site's NIPRNet address space or a destination address belonging to the address block assigned by the Alternate Gateway network service provider.

[HP] acl advanced 3010
[HP-acl-ipv4-adv-3010] rule 1 permit ip destination 192.168.1.0 0.0.0.255
[HP-acl-ipv4-adv-3010] rule 2 permit ip destination 192.168.2.0 0.0.0.255
[HP-acl-ipv4-adv-3010] rule 3 permit ip destination 192.168.3.0 0.0.0.255
[HP-acl-ipv4-adv-3010] rule 4 permit ip destination 192.168.4.0 0.0.0.255
[HP-acl-ipv4-adv-3010] rule 5 deny ip destination any

[HP] interface gig0/1
[HP-GigabitEthernet0/1] packet-filter 3010 inbound