| V-66101 | High | The HP FlexFabric Switch must protect an enclave connected to an Alternate Gateway by using an inbound filter that only permits packets with destination addresses within the sites address space. | Enclaves with Alternate Gateway (AG) connections must take additional steps to ensure there is no compromise on the enclave network or NIPRNet. Without verifying the destination address of traffic... |
| V-66103 | Medium | If Border Gateway Protocol (BGP) is enabled on the HP FlexFabric Switch, the HP FlexFabric Switch must not be a BGP peer with a HP FlexFabric Switch from an Autonomous System belonging to any Alternate Gateway (AG). | The perimeter router will not use a routing protocol to advertise NIPRNet addresses to Alternate Gateways. Most ISPs use Border Gateway Protocol (BGP) to share route information with other... |
| V-66111 | Medium | The HP FlexFabric Switch must encrypt all methods of configured authentication for routing protocols. | A rogue router could send a fictitious routing update to convince a site's perimeter router to send traffic to an incorrect or even a rogue destination. This diverted traffic could be analyzed to... |
| V-66113 | Medium | The HP FlexFabric Switch must use NIST-validated FIPS 140-2 cryptography to implement authentication encryption mechanisms for routing protocols. | A rogue router could send a fictitious routing update to convince a site's perimeter router to send traffic to an incorrect or even a rogue destination. This diverted traffic could be analyzed to... |
| V-66107 | Medium | The HP FlexFabric Switch must be configured to disable non-essential capabilities. | A compromised router introduces risk to the entire network infrastructure as well as data resources that are accessible via the network. The perimeter defense has no oversight or control of... |
| V-66115 | Medium | The HP FlexFabric Switch must enforce that Interior Gateway Protocol (IGP) instances configured on the out-of-band management gateway only peer with their own routing domain. | If the gateway router is not a dedicated device for the out-of-band management network, implementation of several safeguards for containment of management and production traffic boundaries must... |
| V-66117 | Medium | The HP FlexFabric Switch must enforce that the managed network domain and the management network domain are separate routing domains and the Interior Gateway Protocol (IGP) instances are not redistributed or advertised to each other. | If the gateway router is not a dedicated device for the out-of-band management network, several safeguards must be implemented for containment of management and production traffic boundaries,... |
| V-66125 | Medium | The HP FlexFabric Switch must configure the maximum hop limit value to at least 32. | The Neighbor Discovery protocol allows a hop limit value to be advertised by routers in a Router Advertisement message to be used by hosts instead of the standardized default value. If a very... |
| V-65965 | Medium | The HP FlexFabric Switch must be configured so inactive HP FlexFabric Switch interfaces are disabled. | An inactive interface is rarely monitored or controlled and may expose a network to an undetected attack on that interface. unauthorized personnel with access to the communication facility could... |
| V-66109 | Medium | The HP FlexFabric Switch must enable neighbor authentication for all control plane protocols. | A rogue router could send a fictitious routing update to convince a site's perimeter router to send traffic to an incorrect or even a rogue destination. This diverted traffic could be analyzed to... |
| V-66131 | Medium | The HP FlexFabric Switch must enforce approved authorizations for controlling the flow of information between interconnected networks in accordance with applicable policy. | Information flow control regulates authorized information to travel within a network and between interconnected networks. Controlling the flow of network traffic is critical so it does not... |
| V-66121 | Medium | The HP FlexFabric Switch must be configured to restrict it from accepting outbound IP packets that contain an illegitimate address in the source address field via egress filter or by enabling Unicast Reverse Path Forwarding. | A compromised host in an enclave can be used by a malicious actor as a platform to launch cyber attacks on third parties. This is a common practice in "botnets", which are a collection of... |
| V-66137 | Medium | The HP FlexFabric Switch must bind a Protocol Independent Multicast (PIM) neighbor filter to interfaces that have PIM enabled. | Protocol Independent Multicast (PIM) is a routing protocol used to build multicast distribution trees for forwarding multicast traffic across the network infrastructure. Protocol Independent... |
| V-66123 | Medium | The HP FlexFabric Switch must manage excess bandwidth to limit the effects of packet flooding types of denial of service (DoS) attacks. | Denial of service is a condition when a resource is not available for legitimate users. Packet flooding DDoS attacks are referred to as volumetric attacks and have the objective of overloading a... |
| V-66135 | Medium | The HP FlexFabric Switch must disable Protocol Independent Multicast (PIM) on all interfaces that are not required to support multicast routing. | If multicast traffic is forwarded beyond the intended boundary, it is possible that it can be intercepted by unauthorized or unintended personnel. Limiting where, within the network, a given... |
| V-66119 | Medium | The HP FlexFabric Switch must enforce that any interface used for out-of-band management traffic is configured to be passive for the Interior Gateway Protocol (IGP) that is utilized on that management interface. | The out-of-band management access switch will connect to the management interface of the managed network elements. The management interface can be a true out-of-band management interface or a... |
| V-66139 | Medium | The HP FlexFabric Switch must establish boundaries for IPv6 Admin-Local, IPv6 Site-Local, IPv6 Organization-Local scope, and IPv4 Local-Scope multicast traffic. | If multicast traffic is forwarded beyond the intended boundary, it is possible that it can be intercepted by unauthorized or unintended personnel.
Administrative scoped multicast addresses are... |
| V-66133 | Medium | The HP FlexFabric Switch must ensure all Exterior Border Gateway Protocol (eBGP) HP FlexFabric Switches are configured to use Generalized TTL Security Mechanism (GTSM). | As described in RFC 3682, GTSM is designed to protect a router's IP-based control plane from DoS attacks. Many attacks focused on CPU load and line-card overload can be prevented by implementing... |
| V-66129 | Medium | The HP FlexFabric Switch must only allow incoming communications from authorized sources to be routed to authorized destinations. | Unrestricted traffic may contain malicious traffic that poses a threat to an enclave or to other connected networks. Additionally, unrestricted traffic may transit a network, which uses bandwidth... |
| V-66099 | Medium | The HP FlexFabric Switch must not redistribute static routes to alternate gateway service provider into an Exterior Gateway Protocol or Interior Gateway Protocol to the NIPRNet or to other Autonomous System. | If the static routes to the alternate gateway are being redistributed into an Exterior Gateway Protocol or Interior Gateway Protocol to a NIPRNet gateway, this could make traffic on NIPRNet flow... |
| V-66127 | Medium | The HP FlexFabric Switch must protect against or limit the effects of denial of service (DoS) attacks by employing control plane protection. | The Route Processor (RP) is critical to all network operations because it is the component used to build all forwarding paths for the data plane via control plane processes. It is also... |
