UCF STIG Viewer Logo

The HP FlexFabric Switch must have IP Source Guard enabled on all user-facing or untrusted access switch ports.


Overview

Finding ID Version Rule ID IA Controls Severity
V-66073 HFFS-L2-000015 SV-80563r1_rule Medium
Description
IP Source Guard provides source IP address filtering on a Layer 2 port to prevent a malicious host from impersonating a legitimate host by assuming the legitimate host's IP address. The feature uses dynamic DHCP snooping and static IP source binding to match IP addresses to hosts on untrusted Layer 2 access ports. Initially, all IP traffic on the protected port is blocked except for DHCP packets. After a client receives an IP address from the DHCP server, or after static IP source binding is configured by the administrator, all traffic with that IP source address is permitted from that client. Traffic from other hosts is denied. This filtering limits a host's ability to attack the network by claiming a neighbor host's IP address.
STIG Date
HP FlexFabric Switch L2S Security Technical Implementation Guide 2020-06-03

Details

Check Text ( C-66717r1_chk )
Review the HP FlexFabric Switch configuration to verify that IP Source Guard is enabled on all untrusted access switch ports.

If the HP FlexFabric Switch does not have IP Source Guard enabled on all user-facing or untrusted access switch ports, this is a finding.

[HP]dis ip source binding static
Total entries found: 0
IP Address MAC Address Interface VLAN Type
Fix Text (F-72149r1_fix)
Configure the HP FlexFabric Switch to have IP Source Guard enabled on all user-facing or untrusted access switch ports.

[HP-Ten-GigabitEthernet1/0/10]
[HP-Ten-GigabitEthernet1/0/10]ip verify source ip-address [ mac-address ]
[HP-Ten-GigabitEthernet1/0/10]ip source binding ip-address ip-address [ mac-address mac-address ] [ vlan vlan-id ]