The HP FlexFabric Switch must have Dynamic ARP Inspection (DAI) enabled on all user VLANs.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-66075	HFFS-L2-000016	SV-80565r1_rule		Medium

Description
DAI intercepts Address Resolution Protocol (ARP) requests and verifies that each of these packets has a valid IP-to-MAC address binding before updating the local ARP cache and before forwarding the packet to the appropriate destination. Invalid ARP packets are dropped and logged. DAI determines the validity of an ARP packet based on valid IP-to-MAC address bindings stored in the DHCP snooping binding database. If the ARP packet is received on a trusted interface, the switch forwards the packet without any checks. On untrusted interfaces, the switch forwards the packet only if it is valid.

Description

DAI intercepts Address Resolution Protocol (ARP) requests and verifies that each of these packets has a valid IP-to-MAC address binding before updating the local ARP cache and before forwarding the packet to the appropriate destination. Invalid ARP packets are dropped and logged. DAI determines the validity of an ARP packet based on valid IP-to-MAC address bindings stored in the DHCP snooping binding database. If the ARP packet is received on a trusted interface, the switch forwards the packet without any checks. On untrusted interfaces, the switch forwards the packet only if it is valid.

STIG	Date
HP FlexFabric Switch L2S Security Technical Implementation Guide	2018-12-21

Details

Check Text ( C-66719r1_chk )
Review the HP FlexFabric Switch configuration to verify that Dynamic ARP Inspection (DAI) feature is enabled on all user VLANs. If DAI is not enabled on all user VLANs, this is a finding. [HP]display arp detection ARP detection is enabled in the following VLANs: 2 [HP]display arp detection statistics interface Ten-GigabitEthernet 1/0/11 State: U-Untrusted T-Trusted ARP packets dropped by ARP inspect checking: Interface(State) IP Src-MAC Dst-MAC Inspect XGE1/0/11(T) 0 0 0 0 [HP]

Check Text ( C-66719r1_chk )

Review the HP FlexFabric Switch configuration to verify that Dynamic ARP Inspection (DAI) feature is enabled on all user VLANs.

If DAI is not enabled on all user VLANs, this is a finding.

[HP]display arp detection
ARP detection is enabled in the following VLANs:
2

[HP]display arp detection statistics interface Ten-GigabitEthernet 1/0/11
State: U-Untrusted T-Trusted
ARP packets dropped by ARP inspect checking:
Interface(State) IP Src-MAC Dst-MAC Inspect
XGE1/0/11(T) 0 0 0 0
[HP]

Fix Text (F-72151r1_fix)
Configure the HP FlexFabric Switch to have Dynamic ARP Inspection (DAI) enabled on all user VLANs. [HP-vlan2]arp detection enable [HP-Ten-GigabitEthernet1/0/11]arp detection trust