Wireless network adapters must be disabled.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-72819	GEN007841	SV-87463r1_rule		Medium

Description
The use of wireless networking can introduce many different attack vectors into the organization’s network. Common attack vectors such as malicious association and ad hoc networks will allow an attacker to spoof a wireless access point (AP), allowing validated systems to connect to the malicious AP and enabling the attacker to monitor and record network traffic. These malicious APs can also serve to create a man-in-the-middle attack or be used to create a denial of service to valid network resources.

Description

The use of wireless networking can introduce many different attack vectors into the organization’s network. Common attack vectors such as malicious association and ad hoc networks will allow an attacker to spoof a wireless access point (AP), allowing validated systems to connect to the malicious AP and enabling the attacker to monitor and record network traffic. These malicious APs can also serve to create a man-in-the-middle attack or be used to create a denial of service to valid network resources.

STIG	Date
HP-UX 11.31 Security Technical Implementation Guide	2017-05-19

Details

Check Text ( C-72935r1_chk )
This is N/A for systems that do not have wireless network adapters. Verify that there are no wireless interfaces configured on the system: # nwmgr Note: This command will produce a list of interfaces that are configured on the host. With the assistance of the System Administrator, identify any wireless interfaces listed in the output of the above command. If a wireless interface is configured, it must be documented and approved by the local Authorizing Official. If a wireless interface is configured and has not been documented and approved, this is a finding.

Check Text ( C-72935r1_chk )

This is N/A for systems that do not have wireless network adapters.

Verify that there are no wireless interfaces configured on the system:

# nwmgr

Note: This command will produce a list of interfaces that are configured on the host.

With the assistance of the System Administrator, identify any wireless interfaces listed in the output of the above command.

If a wireless interface is configured, it must be documented and approved by the local Authorizing Official.

If a wireless interface is configured and has not been documented and approved, this is a finding.

Fix Text (F-79241r1_fix)
Configure the system to disable all wireless network interfaces.