UCF STIG Viewer Logo

Honeywell Mobility Edge Android Pie devices must be configured to disallow configuration of date and time.


Finding ID Version Rule ID IA Controls Severity
V-235059 HONW-09-010200 SV-235059r626530_rule Medium
Determining the correct time a particular application event occurred on a system is critical when conducting forensic analysis and investigating system events. Periodically synchronizing internal clocks with an authoritative time source is necessary to correctly correlate the timing of events that occur across the enterprise. The three authoritative time sources for Honeywell Mobility Edge Android Pie devices are an authoritative time server that is synchronized with redundant United States Naval Observatory (USNO) time servers as designated for the appropriate DoD network (NIPRNet or SIPRNet), or the Global Positioning System (GPS), or the wireless carrier. Time stamps generated by the audit system in Honeywell Mobility Edge Android Pie devices must include both date and time. The time may be expressed in Coordinated Universal Time (UTC), a modern continuation of Greenwich Mean Time (GMT), or local time with an offset from UTC. SFR ID: FMT_SMF_EXT.1.1 #47
Honeywell Android 9.x COBO Security Technical Implementation Guide 2021-01-25


Check Text ( C-38247r623087_chk )
Review the Honeywell Mobility Edge Android Pie devices Work Profile configuration settings to confirm that autofill services are disabled.

This procedure is performed on both the MDM Administration console and the Honeywell Mobility Edge Android Pie devices device.

On the MDM console, verify that "Set auto (network) time required" is set to "On".

On the Honeywell Android Pie device:
1. Open Settings.
2. Tap "System".
3. Tap "Date & times".
4. Verify that "Automatic date & time" is grayed out.

If on the MDM console "Set auto (network) time required" is not set to "On", or on the Honeywell Android Pie device "Automatic date & time" is grayed out, this is a finding.
Fix Text (F-38210r623088_fix)
Configure Honeywell Android Pie Work Profile to set auto network time.

On the MDM console, in the Android user restrictions section, set "Set auto (network) time required" to "On".