UCF STIG Viewer Logo

The FortiGate device must off-load audit records on to a different system or media than the system being audited.


Overview

Finding ID Version Rule ID IA Controls Severity
V-234181 FGFW-ND-000110 SV-234181r863254_rule Medium
Description
Information stored in one location is vulnerable to accidental or incidental deletion or alteration. Offloading is a common process in information systems with limited audit storage capacity.
STIG Date
Fortinet FortiGate Firewall NDM Security Technical Implementation Guide 2022-09-12

Details

Check Text ( C-37366r863252_chk )
Verify remote logging is configured.

Via the GUI:

Login via the FortiGate GUI with super-admin privileges.

- Navigate to Log and Report.
- Navigate to Log Settings.
- Verify the Remote and Archiving settings.

or

Via the CLI:

Open a CLI console via SSH or from the "CLI Console" button in the GUI.

Run the following commands to verify which logging settings are enabled:

# show full-configuration log fortianalyzer setting | grep -i 'status\|server'
# show full-configuration log fortianalyzer2 setting | grep -i 'status\|server'
# show full-configuration log fortianalyzer3 setting | grep -i 'status\|server'
# show full-configuration log syslogd setting | grep -i 'status\|server'
# show full-configuration log syslogd2 setting | grep -i 'status\|server'
# show full-configuration log syslogd3 setting | grep -i 'status\|server'
# show full-configuration log syslogd4 setting | grep -i 'status\|server'
- The output should indicate enabled and an IP address.

If the FortiGate is not logging to a fortianalyzer or syslog server, this is a finding.
Fix Text (F-37331r863253_fix)
Login via the GUI with super-admin privileges.

1. Click Log and Report.
2. Click Log Settings.

To add a FortiAnalyzer:
- In the Remote Logging and Archiving, enable logging to FortiAnalyzer and provide the IP address.

To add a Syslog server:
- In the Remote Logging and Archiving, enable Send logs to Syslog and provide the IP address.

3. Apply changes.

or

1. Open a CLI console via SSH or from the "CLI Console" button in the GUI.

2. Configure a fortianalyzer or syslog server with the following commands:

FortiAnalyzer:
# config log fortianalyzer setting
# set status enable
# set server {IP Address}
# set upload-option realtime
# end

Syslog:
# config log syslogd setting
# set status enable
# set server {IP Address}
# set mode reliable
# end