The FortiGate device must generate audit records when successful/unsuccessful attempts to modify administrator privileges occur.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-234172	FGFW-ND-000065	SV-234172r835171_rule		Medium

Description
Without generating audit records specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one. Audit records can be generated from various components within the network device (e.g., module or policy filter).

STIG	Date
Fortinet FortiGate Firewall NDM Security Technical Implementation Guide	2022-09-12

Details

Check Text ( C-37357r835170_chk )
Log in to the FortiGate GUI with Super-Admin privilege. 1. Open a CLI console, via SSH or available from the GUI. 2. Run the following command: # show full-configuration log eventfilter | grep -i 'event\|system' The output should be: set event enable set system enable If the event and system parameters are set to disable, this is a finding.

Fix Text (F-37322r611704_fix)
When Event Logging is enabled, the device will audit attempts to modify administrator privileges. To enable event logging, log in to the FortiGate GUI with Super-Admin privilege. 1. Open a CLI console, via SSH or available from the GUI. 2. Run the following command: # config log eventfilter # set event enable # set system enable # end