The FortiGate firewall must fail to a secure state if the firewall filtering functions fail unexpectedly.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-234148	FNFG-FW-000090	SV-234148r628776_rule		Medium

Description
Firewalls that fail suddenly and with no incorporated failure state planning may leave the hosting system available but with a reduced security protection. Failure to a known safe state helps prevent systems from failing to a state that may cause unauthorized access to make changes to the firewall filtering functions. This applies to the configuration of the gateway or network traffic security function of the device. Abort refers to stopping the firewall filtering function before it has finished naturally. The term abort refers to both requested and unexpected terminations.

Description

Firewalls that fail suddenly and with no incorporated failure state planning may leave the hosting system available but with a reduced security protection. Failure to a known safe state helps prevent systems from failing to a state that may cause unauthorized access to make changes to the firewall filtering functions. This applies to the configuration of the gateway or network traffic security function of the device. Abort refers to stopping the firewall filtering function before it has finished naturally. The term abort refers to both requested and unexpected terminations.

STIG	Date
Fortinet FortiGate Firewall Security Technical Implementation Guide	2021-01-29

Details

Check Text ( C-37333r611442_chk )
Log in to the FortiGate GUI with Super-Admin privilege. 1. Open a CLI console, via SSH or available from the GUI. 2. Run the following command: # show ips global \| grep -i fail-open # show system global \| grep -i failopen If ips fail-open is set to enable or av-failopen is not set to off or av-failopen-session is not set to disable, this is a finding.

Fix Text (F-37298r611443_fix)
FortiGate will inherently fail closed upon a power failure. Additionally, the FortiOS kernel enters conserve mode when memory use reaches the red threshold (default 88 percent memory use). When the red threshold is reached, FortiOS functions that react to conserve mode, such as the antivirus transparent proxy, apply conserve mode based on configured conserve mode settings. Additionally, FortiOS generates conserve mode log messages and SNMP traps, and a conserve mode banner appears on the GUI. If memory use reaches the extreme threshold (95 percent memory used), new sessions are dropped and red threshold conserve mode actions continue. Conserve mode actions for filtering are configured as follows: Log in to the FortiGate GUI with Super-Admin privilege. 1. Open a CLI console, via SSH or available from the GUI. 2. Run the following command: # config ips global # set fail-open disable # end # config system global # set av-failopen off # set av-failopen-session disable # end

Fix Text (F-37298r611443_fix)

FortiGate will inherently fail closed upon a power failure. Additionally, the FortiOS kernel enters conserve mode when memory use reaches the red threshold (default 88 percent memory use). When the red threshold is reached, FortiOS functions that react to conserve mode, such as the antivirus transparent proxy, apply conserve mode based on configured conserve mode settings. Additionally, FortiOS generates conserve mode log messages and SNMP traps, and a conserve mode banner appears on the GUI. If memory use reaches the extreme threshold (95 percent memory used), new sessions are dropped and red threshold conserve mode actions continue.

Conserve mode actions for filtering are configured as follows:

Log in to the FortiGate GUI with Super-Admin privilege.

1. Open a CLI console, via SSH or available from the GUI.
2. Run the following command:
# config ips global
# set fail-open disable
# end
# config system global
# set av-failopen off
# set av-failopen-session disable
# end