Forescout must use a bidirectional authentication mechanism configured with a FIPS-validated Advanced Encryption Standard (AES) cipher block algorithm to authenticate with the endpoint device. This is required for compliance with C2C Step 1.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-233339	FORE-NC-000460	SV-233339r856518_rule		Medium

Description
Bidirectional authentication provides stronger safeguards to validate the identity of other devices for connections that are of greater risk. Currently, DoD requires the use of AES for bidirectional authentication since it is the only FIPS-validated AES cipher block algorithm. Because of the challenges of applying this requirement on a large scale, organizations are encouraged to apply the requirement only to those limited number (and type) of devices that truly need to support this capability.

Description

Bidirectional authentication provides stronger safeguards to validate the identity of other devices for connections that are of greater risk. Currently, DoD requires the use of AES for bidirectional authentication since it is the only FIPS-validated AES cipher block algorithm. Because of the challenges of applying this requirement on a large scale, organizations are encouraged to apply the requirement only to those limited number (and type) of devices that truly need to support this capability.

STIG	Date
Forescout Network Access Control Security Technical Implementation Guide	2023-06-22

Details

Check Text ( C-36534r811428_chk )
If DoD is not at C2C Step 1 or higher, this is not a finding. Use the Forescout CLI credentials to verify FIPS mode is set by running the "fstool version" command and look for the "FIPS enabled" setting. Log on using the CLIAdmin credentials established upon initial configuration. Verify FIPS mode by typing the command "fstool version". If Forescout does not use AES, this is a finding.

Fix Text (F-36499r803492_fix)
To enable FIPS mode, log in to the CLI account a use the "fstool fips" command. Note that use of FIPS mode is not mandatory in DoD. However, it is the primary method for mitigation of this requirement and ensuring FIPS compliance. Log on using the CLIAdmin credentials established upon initial configuration. To enable FIPS mode, type "fstool fips". A prompt alerting the user that FIPS 140-2 will be enabled will be displayed. Type "Yes" for FIPS to accept this prompt. Note: Use of FIPS mode is not mandatory in DoD. However, it is the primary method for mitigation of this requirement and ensuring FIPS compliance.

Fix Text (F-36499r803492_fix)

To enable FIPS mode, log in to the CLI account a use the "fstool fips" command.

Note that use of FIPS mode is not mandatory in DoD. However, it is the primary method for mitigation of this requirement and ensuring FIPS compliance.

Log on using the CLIAdmin credentials established upon initial configuration.

To enable FIPS mode, type "fstool fips". A prompt alerting the user that FIPS 140-2 will be enabled will be displayed. Type "Yes" for FIPS to accept this prompt.

Note: Use of FIPS mode is not mandatory in DoD. However, it is the primary method for mitigation of this requirement and ensuring FIPS compliance.