Forescout must be configured so client machines do not communicate with other network devices in the DMZ or subnet except as needed to perform a client assessment or to identify itself.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-233319	FORE-NC-000110	SV-233319r611394_rule		Medium

Description
Devices not compliant with DoD secure configuration policies are vulnerable to attack. Allowing these systems to connect presents a danger to the enclave. Verify that Forescout is not allowed to communicate with other hosts in the DMZ that do not perform security policy assessment or remediation services.

STIG	Date
Forescout Network Access Control Security Technical Implementation Guide	2020-12-11

Details

Check Text ( C-36514r605660_chk )

1. Select Tools >> Options >> Appliance >> IP Assignment. 2. Select Segment >> IP Addresses. 3. Verify the IP address for the DMZ subnet is not present. If Forescout is not configured so the devices and servers in the Forescout solution (e.g., NAC, assessment server, policy decision point) do not communicate with other network devices in the DMZ or subnet except as needed to perform a remote access client assessment or to identify itself, this is a finding.

Fix Text (F-36479r605661_fix)
Configure Forescout to prevent communication with other hosts in the DMZ that do not perform security policy assessment or remediation services. 1. Log on to the Forescout UI. 2. Select Tools >> Options >> Appliance >> IP Assignment. 3. Select Segment >> IP Addresses. Find the IP address for the DMZ subnet and delete it.