The firewall implementation must manage excess bandwidth to limit the effects of packet flooding types of denial-of-service (DoS) attacks.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-79421	SRG-NET-000193-FW-000030	SV-94127r1_rule		Medium

Description
A firewall experiencing a DoS attack will not be able to handle production traffic load. The high utilization and CPU caused by a DoS attack will also have an effect on control keep-alives and timers used for neighbor peering resulting in route flapping and will eventually black hole production traffic. The device must be configured to contain and limit a DoS attack's effect on the device's resource utilization. The use of redundant components and load balancing are examples of mitigating "flood-type" DoS attacks through increased capacity.

Description

A firewall experiencing a DoS attack will not be able to handle production traffic load. The high utilization and CPU caused by a DoS attack will also have an effect on control keep-alives and timers used for neighbor peering resulting in route flapping and will eventually black hole production traffic. The device must be configured to contain and limit a DoS attack's effect on the device's resource utilization. The use of redundant components and load balancing are examples of mitigating "flood-type" DoS attacks through increased capacity.

STIG	Date
Firewall Security Requirements Guide	2020-06-03

Details

Check Text ( C-79035r1_chk )
Use the "show" command to verify that all inbound interfaces have a stateless firewall filter to set rate limits based on a destination. If the firewall does not have a stateless firewall filter that sets rate limits based on a destination, this is a finding.

Fix Text (F-86193r1_fix)
Configure a stateless firewall filter to set rate limits based on a destination of the packets. Apply the stateless firewall filter to all inbound interfaces.