The DBN-6300 must generate audit records when concurrent logons from different workstations occur.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-77013	DBNW-DM-000126	SV-91709r1_rule		Medium

Description
Without generating audit records that are specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one. Audit records can be generated from various components within the network device (e.g., module or policy filter). With the DBN-6300, audit records are automatically backed up on a real-time basis via syslog when enabled.

Description

Without generating audit records that are specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one. Audit records can be generated from various components within the network device (e.g., module or policy filter). With the DBN-6300, audit records are automatically backed up on a real-time basis via syslog when enabled.

STIG	Date
DBN-6300 NDM Security Technical Implementation Guide	2017-09-15

Details

Check Text ( C-76639r1_chk )
Verify the DBN-6300 is connected to the syslog server. Navigate to Settings >> Advanced >> Syslog. Verify that the syslog services are set to "on", the syslog server information is valid, and the syslog server has connected. Navigate to Settings >> Advanced >> Audit Log. Verify that the Audit Syslog, "Use System Syslog" button is set to "Yes" and the Audit Configuration Categories are all checked for Audit Log, Syslog, and Audit Console. Following this verification, a user should log on from two different workstations. Confirm the presence of a syslog message on the syslog server containing logon information pertinent to logons from the same user from two different workstations. If the DBN-6300 is not connected to the syslog server, or if the syslog server is connected but the message containing the information pertinent to a user logging on concurrently from two different workstations is not there, this is a finding.

Check Text ( C-76639r1_chk )

Verify the DBN-6300 is connected to the syslog server.

Navigate to Settings >> Advanced >> Syslog.

Verify that the syslog services are set to "on", the syslog server information is valid, and the syslog server has connected.

Navigate to Settings >> Advanced >> Audit Log.

Verify that the Audit Syslog, "Use System Syslog" button is set to "Yes" and the Audit Configuration Categories are all checked for Audit Log, Syslog, and Audit Console.

Following this verification, a user should log on from two different workstations. Confirm the presence of a syslog message on the syslog server containing logon information pertinent to logons from the same user from two different workstations.

If the DBN-6300 is not connected to the syslog server, or if the syslog server is connected but the message containing the information pertinent to a user logging on concurrently from two different workstations is not there, this is a finding.

Fix Text (F-83709r1_fix)
Configure the DBN-6300 to be connected to the syslog server. Also configure the DBN-6300 to include audit records in the syslog message feed. Navigate to Settings >> Advanced >> Syslog. Enter the syslog connection information (port and IP address) and push the "enabled" button for both "TCP" and "enable". Navigate to Settings >> Advanced >> Audit Log. Verify that the Audit Syslog, "Use System Syslog" button is set to "Yes" and the Audit Configuration Categories are all checked for Audit Log, Syslog, and Audit Console. If the "Use System Syslog" button is not set to "Yes", press the "Yes" button. Click on "Commit".

Fix Text (F-83709r1_fix)

Configure the DBN-6300 to be connected to the syslog server. Also configure the DBN-6300 to include audit records in the syslog message feed.

Navigate to Settings >> Advanced >> Syslog.

Enter the syslog connection information (port and IP address) and push the "enabled" button for both "TCP" and "enable".

Navigate to Settings >> Advanced >> Audit Log.

Verify that the Audit Syslog, "Use System Syslog" button is set to "Yes" and the Audit Configuration Categories are all checked for Audit Log, Syslog, and Audit Console.

If the "Use System Syslog" button is not set to "Yes", press the "Yes" button.

Click on "Commit".