UCF STIG Viewer Logo

The mobile device SA must perform a wipe command on all new or reissued CMDs and a STIG-compliant IT policy will be pushed to the device before issuing it to DoD personnel.


Overview

Finding ID Version Rule ID IA Controls Severity
V-24963 WIR-SPP-008-01 SV-30700r3_rule ECWN-1 Low
Description
Malware can be installed on the device at some point between shipping from the factory and delivery to DoD. The malware could result in the compromise of sensitive DoD information or result in the introduction of malware within the DoD network.
STIG Date
Commercial Mobile Device (CMD) Policy Security Technical Implementation Guide (STIG) 2013-03-12

Details

Check Text ( C-31126r5_chk )
Detailed Policy Requirements:
The CMD system administrator must perform a wipe command on all new or reissued CMDs, reload system software, and load a STIG-compliant security policy on the CMD before issuing it to DoD personnel and placing the device on a DoD network. The intent is to return the device to the factory state before the DoD software baseline is installed.

When wireless activation is performed, the activation password is passed to the user in a secure manner (e.g., activation password is encrypted and emailed to an individual).

Check Procedures:
Interview the IAO. Verify required procedures are followed. Mark as a finding if required procedures were not followed.
Fix Text (F-27597r3_fix)
Perform a wipe command on all new or reissued mobile devices.