The Cisco switch must be configured to obtain its public key certificates from an appropriate certificate policy through an approved service provider.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-220515	CISC-ND-001440	SV-220515r991969_rule		Medium

Description
For user certificates, each organization obtains certificates from an approved, shared service provider, as required by OMB policy. For federal agencies operating a legacy public key infrastructure cross-certified with the Federal Bridge Certification Authority (CA) at medium assurance or higher, this CA will suffice.

STIG	Date
Cisco NX OS Switch NDM Security Technical Implementation Guide	2024-06-06

Details

Check Text ( C-22230r991967_chk )
If PKI certificates are not implemented on the switch, this requirement is not applicable. Step 1: Review the switch configuration to determine if a CA trust point has been configured as shown in the example below: crypto ca trustpoint CA_X enrollment terminal Step 2: Verify the CA is a DOD or DOD-approved service provider by entering the following command: show crypto ca certificates The output will list the following information for each certificate: Trustpoint (will map to a configured trustpoint from step 1) Common Name (CN) of the issuer Organization (O) of the issuer Organization Unit (OU) of the issuer Note: Cisco NX-OS software supports only the manual cut-and-paste method for certificate enrollment. If the switch is not configured to obtain its public key certificates from a DOD or DOD-approved service provider, this is a finding.

Check Text ( C-22230r991967_chk )

If PKI certificates are not implemented on the switch, this requirement is not applicable.

Step 1: Review the switch configuration to determine if a CA trust point has been configured as shown in the example below:

crypto ca trustpoint CA_X
enrollment terminal

Step 2: Verify the CA is a DOD or DOD-approved service provider by entering the following command: show crypto ca certificates

The output will list the following information for each certificate:

Trustpoint (will map to a configured trustpoint from step 1)
Common Name (CN) of the issuer
Organization (O) of the issuer
Organization Unit (OU) of the issuer

Note: Cisco NX-OS software supports only the manual cut-and-paste method for certificate enrollment.

If the switch is not configured to obtain its public key certificates from a DOD or DOD-approved service provider, this is a finding.

Fix Text (F-22219r991968_fix)
Ensure that certificate requests are only sent to DOD or DOD-approved service providers.