Changes are coming to https://stigviewer.com.
Take our survey to help us understand your usage and how we can better serve you in the future.
Take Survey
The Cisco switch must have the default VLAN pruned from all trunk ports that do not require it.
Overview
| Finding ID | Version | Rule ID | IA Controls | Severity |
|---|---|---|---|---|
| V-220692 | CISC-L2-000230 | SV-220692r539671_rule | Medium |
| Description |
|---|
| The default VLAN (i.e., VLAN 1) is a special VLAN used for control plane traffic such as Spanning-Tree Protocol (STP), Dynamic Trunking Protocol (DTP), VLAN Trunking Protocol (VTP), and Port Aggregation Protocol (PAgP). VLAN 1 is enabled on all trunks and ports by default. With larger campus networks, care needs to be taken about the diameter of the STP domain for the default VLAN. Instability in one part of the network could affect the default VLAN, thereby influencing control-plane stability and therefore STP stability for all other VLANs. |
| STIG | Date |
|---|---|
| Cisco NX OS Switch L2S Security Technical Implementation Guide | 2023-06-01 |
Details
| Check Text ( C-22407r539127_chk ) |
|---|
| Review the switch configuration and verify that the default VLAN is pruned from trunk links that do not require it. SW1# show interface trunk -------------------------------------------------------------------------------- Port Native Status Port Vlan Channel -------------------------------------------------------------------------------- Eth1/1 1 trunking -- Eth1/2 1 trunking -- -------------------------------------------------------------------------------- Port Vlans Allowed on Trunk -------------------------------------------------------------------------------- Eth1/1 1-998,1000-4094 Eth1/2 1-998,1000-4094 If the default VLAN is not pruned from trunk links that should not be transporting frames for the VLAN, this is a finding. |
| Fix Text (F-22396r539128_fix) |
|---|
| Step 1: Prune VLAN 1 from any trunk links as necessary. SW1(config)# int e1/2 SW1(config-if)# switchport trunk allowed vlan except 1, 999 SW1(config-if)# end Step 2: Verify VLAN 1 is not allowed on the trunk link. SW1# show interface trunk -------------------------------------------------------------------------------- Port Native Status Port Vlan Channel -------------------------------------------------------------------------------- Eth1/1 1 trunking -- Eth1/2 1 trunking -- -------------------------------------------------------------------------------- Port Vlans Allowed on Trunk -------------------------------------------------------------------------------- Eth1/1 1-998,1000-4094 Eth1/2 2-998,1000-4094 |