The Cisco BGP switch must be configured to reject outbound route advertisements for any prefixes belonging to the IP core.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-221107	CISC-RT-000530	SV-221107r622190_rule		Medium

Description
Outbound route advertisements belonging to the core can result in traffic either looping or being black holed, or at a minimum, using a non-optimized path.

STIG	Date
Cisco NX-OS Switch RTR Security Technical Implementation Guide	2021-03-29

Details

Check Text ( C-22822r409810_chk )
Step 1: Verify that a prefix list has been configured containing prefixes belonging to the IP core. ip prefix-list FILTER_CORE_PREFIXES seq 5 deny x.1.1.0/24 le 32 ip prefix-list FILTER _CORE_PREFIXES seq 10 deny x.1.2.0/24 le 32 ip prefix-list FILTER _CORE_PREFIXES seq 15 permit 0.0.0.0/0 ge 8 Step 2: Verify that the prefix lists has been applied to all external BGP peers as shown in the example below: router bgp xx router-id 10.1.1.1 neighbor x.1.12.2 remote-as xx password 3 7b07d1b3023056a9 address-family ipv4 unicast FILTER _CORE_PREFIXES out neighbor x.2.44.4 remote-as xx password 3 f07a10cb41db8bb6f8f0a340049a9b02 address-family ipv4 unicast prefix-list FILTER _CORE_PREFIXES out If the switch is not configured to reject outbound route advertisements for prefixes belonging to the IP core, this is a finding.

Check Text ( C-22822r409810_chk )

Step 1: Verify that a prefix list has been configured containing prefixes belonging to the IP core.

ip prefix-list FILTER_CORE_PREFIXES seq 5 deny x.1.1.0/24 le 32
ip prefix-list FILTER _CORE_PREFIXES seq 10 deny x.1.2.0/24 le 32
ip prefix-list FILTER _CORE_PREFIXES seq 15 permit 0.0.0.0/0 ge 8

Step 2: Verify that the prefix lists has been applied to all external BGP peers as shown in the example below:

router bgp xx
router-id 10.1.1.1
neighbor x.1.12.2 remote-as xx
password 3 7b07d1b3023056a9
address-family ipv4 unicast
FILTER _CORE_PREFIXES out
neighbor x.2.44.4 remote-as xx
password 3 f07a10cb41db8bb6f8f0a340049a9b02
address-family ipv4 unicast
prefix-list FILTER _CORE_PREFIXES out

If the switch is not configured to reject outbound route advertisements for prefixes belonging to the IP core, this is a finding.

Fix Text (F-22811r409811_fix)
Step 1: Configure a prefix list for containing all customer and local AS prefixes as shown in the example below: SW1(config)# ip prefix-list FILTER_CORE_PREFIXES deny x.1.1.0/24 le 32 SW1(config)# ip prefix-list FILTER _CORE_PREFIXES deny x.1.2.0/24 le 32 SW1(config)# ip prefix-list FILTER _CORE_PREFIXES permit 0.0.0.0/0 ge 8 Step 2: Apply the prefix list filter outbound to each CE neighbor as shown in the example below: SW1(config)# router bgp xx SW1(config-router)# neighbor x.1.12.2 SW1(config-router-neighbor)# address-family ipv4 unicast SW1(config-router-neighbor-af)# prefix-list FILTER _CORE_PREFIXES out SW1(config-router-neighbor-af)# exit SW1(config-router-neighbor)# exit SW1(config-router)# neighbor x.2.44.4 SW1(config-router-neighbor)# address-family ipv4 unicast SW1(config-router-neighbor-af)# prefix-list FILTER _CORE_PREFIXES out SW1(config-router-neighbor-af)# end

Fix Text (F-22811r409811_fix)

Step 1: Configure a prefix list for containing all customer and local AS prefixes as shown in the example below:

SW1(config)# ip prefix-list FILTER_CORE_PREFIXES deny x.1.1.0/24 le 32
SW1(config)# ip prefix-list FILTER _CORE_PREFIXES deny x.1.2.0/24 le 32
SW1(config)# ip prefix-list FILTER _CORE_PREFIXES permit 0.0.0.0/0 ge 8

Step 2: Apply the prefix list filter outbound to each CE neighbor as shown in the example below:

SW1(config)# router bgp xx
SW1(config-router)# neighbor x.1.12.2
SW1(config-router-neighbor)# address-family ipv4 unicast
SW1(config-router-neighbor-af)# prefix-list FILTER _CORE_PREFIXES out
SW1(config-router-neighbor-af)# exit
SW1(config-router-neighbor)# exit
SW1(config-router)# neighbor x.2.44.4
SW1(config-router-neighbor)# address-family ipv4 unicast
SW1(config-router-neighbor-af)# prefix-list FILTER _CORE_PREFIXES out
SW1(config-router-neighbor-af)# end