For accounts using password authentication, the Cisco ISE must implement replay-resistant authentication mechanisms for network access to privileged accounts.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-242642	CSCO-NM-000370	SV-242642r879597_rule		Medium

Description
A replay attack may enable an unauthorized user to gain access to the application. Authentication sessions between the authenticator and the application validating the user credentials must not be vulnerable to a replay attack. An authentication process resists replay attacks if it is impractical to achieve a successful authentication by recording and replaying a previous authentication message. Techniques used to address this include protocols using nonces (e.g., numbers generated for a specific one-time use) or challenges (e.g., TLS, WS_Security). Additional techniques include time-synchronous or challenge-response one-time authenticators.

Description

A replay attack may enable an unauthorized user to gain access to the application. Authentication sessions between the authenticator and the application validating the user credentials must not be vulnerable to a replay attack. An authentication process resists replay attacks if it is impractical to achieve a successful authentication by recording and replaying a previous authentication message. Techniques used to address this include protocols using nonces (e.g., numbers generated for a specific one-time use) or challenges (e.g., TLS, WS_Security). Additional techniques include time-synchronous or challenge-response one-time authenticators.

STIG	Date
Cisco ISE NDM Security Technical Implementation Guide	2023-12-27

Details

Check Text ( C-45917r864201_chk )
Navigate to Administration >> System >> Settings >> FIPS Mode. Verify FIPS Mode is enabled. If FIPS Mode is enabled, this is not a finding. If FIPS mode is not configured, but password authentication is configured to use FIPS 140-2/3 validated replay-resistant authentication mechanism for network access to privileged accounts , this can be lowered to a CAT 3 finding.

Fix Text (F-45874r864202_fix)
Enable FIPS Mode in Cisco ISE to ensure FIPS 140-2/3 algorithms are used in all security functions requiring cryptographic functions. 1. Choose Administration >> System >> Settings >> FIPS Mode. 2. Choose the "Enabled" option from the FIPS Mode drop-down list. 3. Click "Save" and restart the node. NOTE: Configuring FIPS mode is the required DoD configuration. However, this requirement can be lowered to a CAT 3 if the alternative manual configuration is used to configure individual protocols.

Fix Text (F-45874r864202_fix)

Enable FIPS Mode in Cisco ISE to ensure FIPS 140-2/3 algorithms are used in all security functions requiring cryptographic functions.

1. Choose Administration >> System >> Settings >> FIPS Mode.
2. Choose the "Enabled" option from the FIPS Mode drop-down list.
3. Click "Save" and restart the node.

NOTE: Configuring FIPS mode is the required DoD configuration. However, this requirement can be lowered to a CAT 3 if the alternative manual configuration is used to configure individual protocols.