The Cisco ISE must generate audit records when concurrent logons from different workstations occur.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-242625	CSCO-NM-000190	SV-242625r944973_rule		Medium

Description
Without generating audit records that are specific to the security and mission needs of the organization, it would be difficult to establish, correlate, and investigate the events relating to an incident or identify those responsible for one. Audit records can be generated from various components within the network device (e.g., module or policy filter).

STIG	Date
Cisco ISE NDM Security Technical Implementation Guide	2023-12-27

Details

Check Text ( C-45900r944972_chk )
Verify logging categories have been configured. From the Web Admin portal: 1. Choose Administration >> System >> Logging >> Logging Categories. 2. Verify the Administrative and Operational Audit logs are set to INFO severity category. If the Administrative and Operational Audit are not set to the INFO severity category, this is a finding.

Fix Text (F-45857r944973_fix)
Enable logging categories for Cisco ISE. From the Web Admin portal: 1. Choose Administration >> System >> Logging >> Logging Categories. 2. Click the radio button next to the Administrative and Operational Audit logging category and then click "Edit". 3. Choose INFO from the Log Severity Level drop-down list. 4. In the Targets field, move the syslog target name that is being used to the Selected box. 5. Click "Save".

Fix Text (F-45857r944973_fix)

Enable logging categories for Cisco ISE.

From the Web Admin portal:
1. Choose Administration >> System >> Logging >> Logging Categories.
2. Click the radio button next to the Administrative and Operational Audit logging category and then click "Edit".
3. Choose INFO from the Log Severity Level drop-down list.
4. In the Targets field, move the syslog target name that is being used to the Selected box.
5. Click "Save".