Before establishing a local, remote, and/or network connection with any endpoint device, the Cisco ISE must use a bidirectional authentication mechanism configured with a FIPS-validated Advanced Encryption Standard (AES) cipher block algorithm to authenticate with the endpoint device. This is required for compliance with C2C Step 1.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-242604	CSCO-NC-000300	SV-242604r812790_rule		Medium

Description

Bidirectional authentication provides stronger safeguards to validate the identity of other devices for connections that are of greater risk. Currently, DoD requires the use of AES for bidirectional authentication since it is the only FIPS-validated AES cipher block algorithm. Because of the challenges of applying this requirement on a large scale, organizations are encouraged to apply the requirement only to those limited number (and type) of devices that truly need to support this capability.

STIG	Date
Cisco ISE NAC Security Technical Implementation Guide	2021-12-21

Details

Check Text ( C-45879r812789_chk )
If DoD is not at C2C Step 1 or higher, this is not a finding. From the Web Admin portal: 1. Navigate to Administration >> System >> Settings >> Security Settings. 2. Ensure "Allow TLS1.0", "Allow TLS1.1", and "Allow legacy unsafe TLS renegotiation for ISE as a client" are unchecked. If TLS 1.0 or 1.1 is enabled, this is a finding.

Fix Text (F-45836r714121_fix)
From the Web Admin portal: 1. Navigate to Administration >> System >> Settings >> Security Settings. 2. Ensure "Allow TLS1.0", "Allow TLS1.1", and "Allow legacy unsafe TLS renegotiation for ISE as a client" are unchecked.