The Cisco ISE must be configured to notify the user before proceeding with remediation of the user's endpoint device when automated remediation is used.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-242582	CSCO-NC-000080	SV-242582r714056_rule		Low

Description
Notification will let the user know that installation is in progress and may take a while. This notice may deter the user from disconnecting and retrying the connection before the remediation is completed. Premature disconnections may increase network demand and frustrate the user. Note: This policy does not require remediation to be performed by the Cisco ISE, but will apply if remediation services are used.

Description

Notification will let the user know that installation is in progress and may take a while. This notice may deter the user from disconnecting and retrying the connection before the remediation is completed. Premature disconnections may increase network demand and frustrate the user. Note: This policy does not require remediation to be performed by the Cisco ISE, but will apply if remediation services are used.

STIG	Date
Cisco ISE NAC Security Technical Implementation Guide	2021-04-14

Details

Check Text ( C-45857r714054_chk )
Verify that each requirement used has a message to display. 1. Navigate to Work Centers >> Posture >> Posture Policy. 2. Make a note of each "Requirement" tied to an enabled Posture Policy. 3. Navigate to Work Centers >> Posture >> Policy Elements >> Requirements. 4. Verify that each requirement noted has a message in the "Message Shown to Agent User" box. If a requirement that is used does not have a message, this is a finding.

Check Text ( C-45857r714054_chk )

Verify that each requirement used has a message to display.

1. Navigate to Work Centers >> Posture >> Posture Policy.
2. Make a note of each "Requirement" tied to an enabled Posture Policy.
3. Navigate to Work Centers >> Posture >> Policy Elements >> Requirements.
4. Verify that each requirement noted has a message in the "Message Shown to Agent User" box.

If a requirement that is used does not have a message, this is a finding.

Fix Text (F-45814r714055_fix)
Configure a message prior to remediation: 1. Navigate to Work Centers >> Posture >> Policy Elements >> Requirements. 2. On the requirements under "Remediation Actions", define a message in the "Message Shown to Agent User". 3. Choose "Done". 4. Choose "Save".