Changes are coming to https://stigviewer.com.
Take our survey to help us understand your usage and how we can better serve you in the future.
Take Survey
The Cisco router must be configured to have Internet Control Message Protocol (ICMP) mask reply messages disabled on all external interfaces.
Overview
| Finding ID | Version | Rule ID | IA Controls | Severity |
|---|---|---|---|---|
| V-216747 | CISC-RT-000180 | SV-216747r531087_rule | Medium |
| Description |
|---|
| The ICMP supports IP traffic by relaying information about paths, routes, and network conditions. Routers automatically send ICMP messages under a wide variety of conditions. Mask Reply ICMP messages are commonly used by attackers for network mapping and diagnosis. |
| STIG | Date |
|---|---|
| Cisco IOS XR Router RTR Security Technical Implementation Guide | 2020-09-23 |
Details
| Check Text ( C-17979r288630_chk ) |
|---|
| Review the router configuration and verify that ipv4 mask-reply command is not enabled on any external interfaces as shown in the example below. interface GigabitEthernet0/0/0/1 ipv4 address x.11.1.2 255.255.255.252 ipv4 mask-reply If the router configuration has the ipv4 mask-reply command is enabled on any external interfaces, this is a finding. |
| Fix Text (F-17977r288631_fix) |
|---|
| Disable ipv4 mask-reply on all external interfaces as shown below. RP/0/0/CPU0:R3(config)#int g0/0/0/1 RP/0/0/CPU0:R3(config-if)#no ipv4 mask-reply |