Changes are coming to https://stigviewer.com.
Take our survey to help us understand your usage and how we can better serve you in the future.
Take Survey
The Cisco multicast edge router must be configured to establish boundaries for administratively scoped multicast traffic.
Overview
| Finding ID | Version | Rule ID | IA Controls | Severity |
|---|---|---|---|---|
| V-96825 | CISC-RT-000810 | SV-105963r1_rule | Low |
| Description |
|---|
| If multicast traffic is forwarded beyond the intended boundary, it is possible that it can be intercepted by unauthorized or unintended personnel. Administrative scoped multicast addresses are locally assigned and are to be used exclusively by the enterprise network or enclave. Administrative scoped multicast traffic must not cross the enclave perimeter in either direction. Restricting multicast traffic makes it more difficult for a malicious user to access sensitive traffic. Admin-Local scope is encouraged for any multicast traffic within a network intended for network management, as well as for control plane traffic that must reach beyond link-local destinations. |
| STIG | Date |
|---|---|
| Cisco IOS XR Router RTR Security Technical Implementation Guide | 2020-06-30 |
Details
| Check Text ( C-95661r1_chk ) |
|---|
| Review the router configuration and verify that admin-scope multicast traffic is blocked at the external edge as shown in the example below. ipv4 access-list MULTICAST_SCOPE 10 deny ipv4 239.0.0.0 0.255.255.255 any 20 permit ipv4 any any … … … multicast-routing address-family ipv4 interface GigabitEthernet0/0/0/1 enable boundary MULTICAST_SCOPE ! interface GigabitEthernet0/0/0/2 enable ! ! ! If the router is not configured to establish boundaries for administratively scoped multicast traffic, this is a finding. |
| Fix Text (F-102505r1_fix) |
|---|
| Step 1: Configure the ACL to deny packets with multicast administratively scoped destination addresses as shown in the example below. RP/0/0/CPU0:R2(config)#Ipv4 access-list MULTICAST_SCOPE RP/0/0/CPU0:R2(config-ipv4-acl)#deny 239.0.0.0 0.255.255.255 RP/0/0/CPU0:R2(config-ipv4-acl)#permit any Step 2: Apply the multicast boundary at the appropriate interfaces as shown in the example below. RP/0/0/CPU0:R2(config)#multicast-routing RP/0/0/CPU0:R2(config-mcast)#address-family ipv4 RP/0/0/CPU0:R2(config-mcast-default-ipv4)#int g0/0/0/1 RP/0/0/CPU0:R2(config-mcast-default-ipv4-if)#boundary MULTICAST_SCOPE RP/0/0/CPU0:R2(config-mcast-default-ipv4-if)#end |