The Cisco router must dynamically manage identifiers.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-96469	CISC-ND-001160	SV-105607r1_rule		Medium

Description
Dynamic identifier management prevents disruption of operations by minimizing the need for system restarts. Dynamic establishment of new identifiers will occur while the system is operational. New identifiers or changes to existing identifiers must take effect without the need for a system or session restart. Pre-established trust relationships and mechanisms with appropriate authorities (e.g., Active Directory or authentication server) which validate each identifier are essential to prevent unauthorized access by changed or revoked accounts.

Description

Dynamic identifier management prevents disruption of operations by minimizing the need for system restarts. Dynamic establishment of new identifiers will occur while the system is operational. New identifiers or changes to existing identifiers must take effect without the need for a system or session restart. Pre-established trust relationships and mechanisms with appropriate authorities (e.g., Active Directory or authentication server) which validate each identifier are essential to prevent unauthorized access by changed or revoked accounts.

STIG	Date
Cisco IOS XR Router NDM Security Technical Implementation Guide	2019-07-26

Details

Check Text ( C-95305r1_chk )
The Cisco router is not compliant with this requirement. However, the risk associated with this requirement can be fully mitigated if the router is configured to utilize an authentication server to authenticate and authorize users for administrative access. Review the router configuration to verify that the device is configured to use an authentication server as primary source for authentication as shown in the following example: radius-server host 10.1.3.16 auth-port 1645 acct-port 1646 key xxxxxxxxxx … … … aaa authentication login LOGIN_AUTHENTICATION group radius local line console login authentication LOGIN_AUTHENTICATION ! line default login authentication LOGIN_AUTHENTICATION transport input ssh If the router is not configured to use an authentication server to authenticate and authorize users for administrative access, this is a finding.

Check Text ( C-95305r1_chk )

The Cisco router is not compliant with this requirement. However, the risk associated with this requirement can be fully mitigated if the router is configured to utilize an authentication server to authenticate and authorize users for administrative access.

Review the router configuration to verify that the device is configured to use an authentication server as primary source for authentication as shown in the following example:

radius-server host 10.1.3.16 auth-port 1645 acct-port 1646
key xxxxxxxxxx
…
…
…
aaa authentication login LOGIN_AUTHENTICATION group radius local
line console
login authentication LOGIN_AUTHENTICATION
!
line default
login authentication LOGIN_AUTHENTICATION
transport input ssh

If the router is not configured to use an authentication server to authenticate and authorize users for administrative access, this is a finding.

Fix Text (F-102145r2_fix)
Step 1: Configure the router to use an authentication server as shown in the following example: RP/0/0/CPU0:R3(config)#radius-server host 10.1.3.16 key xxxxxxxx Step 2: Configure the authentication order to use the authentication server as primary source for authentication as shown in the following example: RP/0/0/CPU0:R3(config)#aaa authentication login LOGIN_AUTHENTICATION group radius local Step 3: Configure all network connections associated with a device management to use an authentication server for the purpose of login authentication as shown in the following example: RP/0/0/CPU0:R3(config)#line default RP/0/0/CPU0:R3(config-line)#login authentication LOGIN_AUTHENTICATION RP/0/0/CPU0:R3(config-line)#exit RP/0/0/CPU0:R3(config)#line console RP/0/0/CPU0:R3(config-line)#login authentication LOGIN_AUTHENTICATION

Fix Text (F-102145r2_fix)

Step 1: Configure the router to use an authentication server as shown in the following example:

RP/0/0/CPU0:R3(config)#radius-server host 10.1.3.16 key xxxxxxxx

Step 2: Configure the authentication order to use the authentication server as primary source for authentication as shown in the following example:

RP/0/0/CPU0:R3(config)#aaa authentication login LOGIN_AUTHENTICATION group radius local

Step 3: Configure all network connections associated with a device management to use an authentication server for the purpose of login authentication as shown in the following example:

RP/0/0/CPU0:R3(config)#line default
RP/0/0/CPU0:R3(config-line)#login authentication LOGIN_AUTHENTICATION
RP/0/0/CPU0:R3(config-line)#exit
RP/0/0/CPU0:R3(config)#line console
RP/0/0/CPU0:R3(config-line)#login authentication LOGIN_AUTHENTICATION