UCF STIG Viewer Logo
Changes are coming to https://stigviewer.com. Take our survey to help us understand your usage and how we can better serve you in the future.
Take Survey

The Cisco perimeter switch must be configured to block inbound packets with source Bogon IP address prefixes.


Overview

Finding ID Version Rule ID IA Controls Severity
V-221010 CISC-RT-000270 SV-221010r863263_rule Medium
Description
Packets with Bogon IP source addresses should never be allowed to traverse the IP core. Bogon IP networks are RFC1918 addresses or address blocks that have never been assigned by the IANA or have been reserved.
STIG Date
Cisco IOS XE Switch RTR Security Technical Implementation Guide 2024-06-06

Details

Check Text ( C-22725r863261_chk )
Review the switch configuration to verify that an ingress ACL applied to all external interfaces is blocking packets with Bogon source addresses.

Step 1: Verify an ACL has been configured containing the current Bogon prefixes as shown in the example below:

ip access-list extended FILTER_PERIMETER
deny ip 0.0.0.0 0.255.255.255 any log-input
deny ip 10.0.0.0 0.255.255.255 any log-input
deny ip 100.64.0.0 0.63.255.255 any log-input
deny ip 127.0.0.0 0.255.255.255 any log-input
deny ip 169.254.0.0 0.0.255.255 any log-input
deny ip 172.16.0.0 0.15.255.255 any log-input
deny ip 192.0.0.0 0.0.0.255 any log-input
deny ip 192.0.2.0 0.0.0.255 any log-input
deny ip 192.168.0.0 0.0.255.255 any log-input
deny ip 198.18.0.0 0.1.255.255 any log-input
deny ip 198.51.100.0 0.0.0.255 any log-input
deny ip 203.0.113.0 0.0.0.255 any log-input
deny ip 224.0.0.0 31.255.255.255 any log-input
deny ip 240.0.0.0 15.255.255.255 any log-input
permit tcp any any established
permit tcp host x.12.1.9 host x.12.1.10 eq bgp
permit tcp host x.12.1.9 eq bgp host x.12.1.10
permit icmp host x.12.1.9 host x.12.1.10 echo
permit icmp host x.12.1.9 host x.12.1.10 echo-reply



deny ip any any log-input

Step 2: Verify that the inbound ACL applied to all external interfaces will block all traffic from Bogon source addresses.

interface GigabitEthernet0/1
description Link to DISN
ip address x.12.1.10 255.255.255.254
ip access-group FILTER_PERIMETER in

If the switch is not configured to block inbound packets with source Bogon IP address prefixes, this is a finding.
Fix Text (F-22714r863262_fix)
Configure the perimeter to block inbound packets with Bogon source addresses.

Step 1: Configure an ACL containing the current Bogon prefixes as shown below:

SW1(config)#ip access-list extended FILTER_PERIMETER
SW1(config-ext-nacl)#deny ip 0.0.0.0 0.255.255.255 any log-input
SW1(config-ext-nacl)#deny ip 10.0.0.0 0.255.255.255 any log-input
SW1(config-ext-nacl)#deny ip 100.64.0.0 0.63.255.255 any log-input
SW1(config-ext-nacl)#deny ip 127.0.0.0 0.255.255.255 any log-input
SW1(config-ext-nacl)#deny ip 169.254.0.0 0.0.255.255 any log-input
SW1(config-ext-nacl)#deny ip 172.16.0.0 0.15.255.255 any log-input
SW1(config-ext-nacl)#deny ip 192.0.0.0 0.0.0.255 any log-input
SW1(config-ext-nacl)#deny ip 192.0.2.0 0.0.0.255 any log-input
SW1(config-ext-nacl)#deny ip 192.168.0.0 0.0.255.255 any log-input
SW1(config-ext-nacl)#deny ip 198.18.0.0 0.1.255.255 any log-input
SW1(config-ext-nacl)#deny ip 198.51.100.0 0.0.0.255 any log-input
SW1(config-ext-nacl)#deny ip 203.0.113.0 0.0.0.255 any log-input
SW1(config-ext-nacl)#deny ip 224.0.0.0 31.255.255.255 any log-input
SW1(config-ext-nacl)#deny ip 240.0.0.0 15.255.255.255 any log-input
SW1(config-ext-nacl)#permit tcp any any established
SW1(config-ext-nacl)#permit tcp host x.12.1.9 host x.12.1.10 eq bgp
SW1(config-ext-nacl)#permit tcp host x.12.1.9 eq bgp host x.12.1.10
SW1(config-ext-nacl)#permit icmp host x.12.1.9 host x.12.1.10 echo
SW1(config-ext-nacl)#permit icmp host x.12.1.9 host x.12.1.10 echo-reply



SW1(config-ext-nacl)#deny ip any any log-input
SW1(config-ext-nacl)#end

Step 2: Apply the ACL inbound on all external interfaces.

SW1(config)#int g0/0
SW1(config-if)#ip access-group FILTER_PERIMETER in
SW1(config-if)#end