The Cisco Multicast Source Discovery Protocol (MSDP) switch must be configured to filter received source-active multicast advertisements for any undesirable multicast groups and sources.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-221066	CISC-RT-000920	SV-221066r622190_rule		Low

Description
The interoperability of BGP extensions for interdomain multicast routing and MSDP enables seamless connectivity of multicast domains between autonomous systems. MP-BGP advertises the unicast prefixes of the multicast sources used by Protocol Independent Multicast (PIM) switches to perform RPF checks and build multicast distribution trees. MSDP is a mechanism used to connect multiple PIM sparse-mode domains, allowing RPs from different domains to share information about active sources. When RPs in peering multicast domains hear about active sources, they can pass on that information to their local receivers, thereby allowing multicast data to be forwarded between the domains. Configuring an import policy to block multicast advertisements for reserved, Martian, single-source multicast, and any other undesirable multicast groups, as well as any source-group (S, G) states with Bogon source addresses, would assist in avoiding unwanted multicast traffic from traversing the core.

Description

The interoperability of BGP extensions for interdomain multicast routing and MSDP enables seamless connectivity of multicast domains between autonomous systems. MP-BGP advertises the unicast prefixes of the multicast sources used by Protocol Independent Multicast (PIM) switches to perform RPF checks and build multicast distribution trees. MSDP is a mechanism used to connect multiple PIM sparse-mode domains, allowing RPs from different domains to share information about active sources. When RPs in peering multicast domains hear about active sources, they can pass on that information to their local receivers, thereby allowing multicast data to be forwarded between the domains. Configuring an import policy to block multicast advertisements for reserved, Martian, single-source multicast, and any other undesirable multicast groups, as well as any source-group (S, G) states with Bogon source addresses, would assist in avoiding unwanted multicast traffic from traversing the core.

STIG	Date
Cisco IOS XE Switch RTR Security Technical Implementation Guide	2023-02-28

Details

Check Text ( C-22781r408992_chk )
Review the switch configuration to determine if there is import policy to block source-active multicast advertisements for any undesirable multicast groups, as well as any (S, G) states with undesirable source addresses. Step 1: Verify that an inbound source-active filter is bound to each MSDP peer. ip msdp peer x.1.28.2 remote-as 2 ip msdp sa-filter in x.1.28.2 list INBOUND_MSDP_SA_FILTER Step 2: Review the access lists referenced by the source-active filter to verify that undesirable multicast groups, auto-RP, single source multicast (SSM) groups, and advertisements from undesirable sources are blocked. ip access-list extended INBOUND_MSDP_SA_FILTER deny ip any host 224.0.1.3 deny ip any host 224.0.1.24 deny ip any host 224.0.1.22 deny ip any host 224.0.1.2 deny ip any host 224.0.1.35 deny ip any host 224.0.1.60 deny ip any host 224.0.1.39 deny ip any host 224.0.1.40 deny ip any 232.0.0.0 0.255.255.255 deny ip any 239.0.0.0 0.255.255.255 deny ip 10.0.0.0 0.255.255.255 any deny ip 127.0.0.0 0.255.255.255 any deny ip 172.16.0.0 0.15.255.255 any deny ip 192.168.0.0 0.0.255.255 any permit ip any any If the switch is not configured with an import policy to filter undesirable SA multicast advertisements, this is a finding.

Check Text ( C-22781r408992_chk )

Review the switch configuration to determine if there is import policy to block source-active multicast advertisements for any undesirable multicast groups, as well as any (S, G) states with undesirable source addresses.

Step 1: Verify that an inbound source-active filter is bound to each MSDP peer.

ip msdp peer x.1.28.2 remote-as 2
ip msdp sa-filter in x.1.28.2 list INBOUND_MSDP_SA_FILTER

Step 2: Review the access lists referenced by the source-active filter to verify that undesirable multicast groups, auto-RP, single source multicast (SSM) groups, and advertisements from undesirable sources are blocked.

ip access-list extended INBOUND_MSDP_SA_FILTER
deny ip any host 224.0.1.3
deny ip any host 224.0.1.24
deny ip any host 224.0.1.22
deny ip any host 224.0.1.2
deny ip any host 224.0.1.35
deny ip any host 224.0.1.60
deny ip any host 224.0.1.39
deny ip any host 224.0.1.40
deny ip any 232.0.0.0 0.255.255.255
deny ip any 239.0.0.0 0.255.255.255
deny ip 10.0.0.0 0.255.255.255 any
deny ip 127.0.0.0 0.255.255.255 any
deny ip 172.16.0.0 0.15.255.255 any
deny ip 192.168.0.0 0.0.255.255 any
permit ip any any

If the switch is not configured with an import policy to filter undesirable SA multicast advertisements, this is a finding.

Fix Text (F-22770r408993_fix)
Configure the MSDP switch to filter received source-active multicast advertisements for any undesirable multicast groups and sources as shown in the example below: SW1(config)#ip access-list extended INBOUND_MSDP_SA_FILTER SW1(config-ext-nacl)#deny ip any host 224.0.1.3 ! Rwhod SW1(config-ext-nacl)#deny ip any host 224.0.1.24 ! Microsoft-ds SW1(config-ext-nacl)#deny ip any host 224.0.1.22 ! SVRLOC SW1(config-ext-nacl)#deny ip any host 224.0.1.2 ! SGI-Dogfight SW1(config-ext-nacl)#deny ip any host 224.0.1.35 ! SVRLOC-DA SW1(config-ext-nacl)#deny ip any host 224.0.1.60 ! hp-device-disc SW1(config-ext-nacl)#deny ip any host 224.0.1.39 ! Auto-RP SW1(config-ext-nacl)#deny ip any host 224.0.1.40 ! Auto-RP SW1(config-ext-nacl)#deny ip any 232.0.0.0 0.255.255.255 ! SSM range SW1(config-ext-nacl)#deny ip any 239.0.0.0 0.255.255.255 ! Admin scoped range SW1(config-ext-nacl)#deny ip 10.0.0.0 0.255.255.255 any ! RFC 1918 address range SW1(config-ext-nacl)#deny ip 127.0.0.0 0.255.255.255 any ! RFC 1918 address range SW1(config-ext-nacl)#deny ip 172.16.0.0 0.15.255.255 any ! RFC 1918 address range SW1(config-ext-nacl)#deny ip 192.168.0.0 0.0.255.255 any ! RFC 1918 address range SW1(config-ext-nacl)#permit ip any any SW1(config-ext-nacl)#exit SW1(config)#ip msdp sa-filter in x.1.28.2 list INBOUND_MSDP_SA_FILTER

Fix Text (F-22770r408993_fix)

Configure the MSDP switch to filter received source-active multicast advertisements for any undesirable multicast groups and sources as shown in the example below:

SW1(config)#ip access-list extended INBOUND_MSDP_SA_FILTER
SW1(config-ext-nacl)#deny ip any host 224.0.1.3 ! Rwhod
SW1(config-ext-nacl)#deny ip any host 224.0.1.24 ! Microsoft-ds
SW1(config-ext-nacl)#deny ip any host 224.0.1.22 ! SVRLOC
SW1(config-ext-nacl)#deny ip any host 224.0.1.2 ! SGI-Dogfight
SW1(config-ext-nacl)#deny ip any host 224.0.1.35 ! SVRLOC-DA
SW1(config-ext-nacl)#deny ip any host 224.0.1.60 ! hp-device-disc
SW1(config-ext-nacl)#deny ip any host 224.0.1.39 ! Auto-RP
SW1(config-ext-nacl)#deny ip any host 224.0.1.40 ! Auto-RP
SW1(config-ext-nacl)#deny ip any 232.0.0.0 0.255.255.255 ! SSM range
SW1(config-ext-nacl)#deny ip any 239.0.0.0 0.255.255.255 ! Admin scoped range
SW1(config-ext-nacl)#deny ip 10.0.0.0 0.255.255.255 any ! RFC 1918 address range
SW1(config-ext-nacl)#deny ip 127.0.0.0 0.255.255.255 any ! RFC 1918 address range
SW1(config-ext-nacl)#deny ip 172.16.0.0 0.15.255.255 any ! RFC 1918 address range
SW1(config-ext-nacl)#deny ip 192.168.0.0 0.0.255.255 any ! RFC 1918 address range
SW1(config-ext-nacl)#permit ip any any
SW1(config-ext-nacl)#exit
SW1(config)#ip msdp sa-filter in x.1.28.2 list INBOUND_MSDP_SA_FILTER