The Cisco switch must be configured to have all inactive layer 3 interfaces disabled.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-220991	CISC-RT-000060	SV-220991r622190_rule		Low

Description
An inactive interface is rarely monitored or controlled and may expose a network to an undetected attack on that interface. Unauthorized personnel with access to the communication facility could gain access to a switch by connecting to a configured interface that is not in use. If an interface is no longer used, the configuration must be deleted and the interface disabled. For sub-interfaces, delete sub-interfaces that are on inactive interfaces and delete sub-interfaces that are themselves inactive. If the sub-interface is no longer necessary for authorized communications, it must be deleted.

Description

An inactive interface is rarely monitored or controlled and may expose a network to an undetected attack on that interface. Unauthorized personnel with access to the communication facility could gain access to a switch by connecting to a configured interface that is not in use. If an interface is no longer used, the configuration must be deleted and the interface disabled. For sub-interfaces, delete sub-interfaces that are on inactive interfaces and delete sub-interfaces that are themselves inactive. If the sub-interface is no longer necessary for authorized communications, it must be deleted.

STIG	Date
Cisco IOS XE Switch RTR Security Technical Implementation Guide	2023-02-28

Details

Check Text ( C-22706r408767_chk )
Review the switch configuration and verify that inactive interfaces have been disabled as shown below: interface GigabitEthernet3 no switchport shutdown ! interface GigabitEthernet4 no switchport shutdown If an interface is not being used but is configured or enabled, this is a finding.

Fix Text (F-22695r408768_fix)
Disable all inactive interfaces as shown below: SW1(config)#interface GigabitEthernet3 SW1(config-if)#shutdown SW1(config)#interface GigabitEthernet4 SW1(config-if)#shutdown