The Cisco switch must be configured to automatically audit account removal actions.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-220522	CISC-ND-000120	SV-220522r960786_rule		Medium

Description
Account management, as a whole, ensures access to the network device is being controlled in a secure manner by granting access to only authorized personnel. Auditing account removal actions will support account management procedures. When device management accounts are terminated, user or service accessibility may be affected. Auditing also ensures authorized active accounts remain enabled and available for use when required.

Description

Account management, as a whole, ensures access to the network device is being controlled in a secure manner by granting access to only authorized personnel. Auditing account removal actions will support account management procedures. When device management accounts are terminated, user or service accessibility may be affected. Auditing also ensures authorized active accounts remain enabled and available for use when required.

STIG	Date
Cisco IOS XE Switch NDM Security Technical Implementation Guide	2024-06-06

Details

Check Text ( C-22237r508510_chk )
Review the switch configuration to determine if it automatically audits account removal. The configuration should look similar to the example below: archive log config logging enable Note: Configuration changes can be viewed using the show archive log config all command. If account removal is not automatically audited, this is a finding.

Fix Text (F-22226r508511_fix)
Configure the switch to log account removal using the following commands: SW4(config)#archive SW4(config-archive)#log config SW4(config-archive-log-cfg)#logging enable SW4(config-archive-log-cfg)#end