The Cisco switch must be configured to limit privileges to change the software resident within software libraries.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-220533	CISC-ND-000460	SV-220533r508545_rule		Medium

Description
Changes to any software components of the network device can have significant effects on the overall security of the network. Therefore, only qualified and authorized individuals should be allowed administrative access to the network device for implementing any changes or upgrades. If the network device were to enable non-authorized users to make changes to software libraries, those changes could be implemented without undergoing testing, validation, and approval.

Description

Changes to any software components of the network device can have significant effects on the overall security of the network. Therefore, only qualified and authorized individuals should be allowed administrative access to the network device for implementing any changes or upgrades. If the network device were to enable non-authorized users to make changes to software libraries, those changes could be implemented without undergoing testing, validation, and approval.

STIG	Date
Cisco IOS XE Switch NDM Security Technical Implementation Guide	2021-09-16

Details

Check Text ( C-22248r508543_chk )
Review the Cisco switch configuration to verify that it is compliant with this requirement. Step 1: If persistent logging is enabled as shown in the example below, go to Step 2. Otherwise, this requirement is not applicable. logging persistent url disk0:/logfile size 134217728 filesize 16384 Step 2: Verify that the switch is not configured with a privilege level other than "15" to allow access to the file system as shown in the example below: file privilege 10 Note: The default privilege level required for access to the file system is "15"; hence, the command file privilege "15" will not be shown in the configuration. If the switch is configured with a privilege level other than "15" to allow access to the file system, this is a finding.

Check Text ( C-22248r508543_chk )

Review the Cisco switch configuration to verify that it is compliant with this requirement.

Step 1: If persistent logging is enabled as shown in the example below, go to Step 2. Otherwise, this requirement is not applicable.

logging persistent url disk0:/logfile size 134217728 filesize 16384

Step 2: Verify that the switch is not configured with a privilege level other than "15" to allow access to the file system as shown in the example below:

file privilege 10

Note: The default privilege level required for access to the file system is "15"; hence, the command file privilege "15" will not be shown in the configuration.

If the switch is configured with a privilege level other than "15" to allow access to the file system, this is a finding.

Fix Text (F-22237r508544_fix)
If persistent logging is enabled, configure the switch to only allow administrators with privilege level "15" access to the file system as shown in the example below: SW4(config)#file privilege 15