The Cisco switch must be configured to send log data to a central log server for the purpose of forwarding alerts to the administrators and the ISSO.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-220568	CISC-ND-001450	SV-220568r531084_rule		High

Description
The aggregation of log data kept on a syslog server can be used to detect attacks and trigger an alert to the appropriate security personnel. The stored log data can used to detect weaknesses in security that enable the network IA team to find and address these weaknesses before breaches can occur. Reviewing these logs, whether before or after a security breach, are important in showing whether someone is an internal employee or an outside threat.

Description

The aggregation of log data kept on a syslog server can be used to detect attacks and trigger an alert to the appropriate security personnel. The stored log data can used to detect weaknesses in security that enable the network IA team to find and address these weaknesses before breaches can occur. Reviewing these logs, whether before or after a security breach, are important in showing whether someone is an internal employee or an outside threat.

STIG	Date
Cisco IOS XE Switch NDM Security Technical Implementation Guide	2020-09-23

Details

Check Text ( C-22283r508648_chk )
Verify that the switch is configured to send logs to a central log server. The configuration should look similar to the example below: logging trap notifications logging x.x.x.x Note: Default for sending log messages to the syslog server is informational (level 6); hence, the command logging trap informational will not be seen in the configuration. Level of log messages sent to the syslog server can be verified using the show logging command. If the switch is not configured to send log data to the syslog server, this is a finding.

Check Text ( C-22283r508648_chk )

Verify that the switch is configured to send logs to a central log server. The configuration should look similar to the example below:

logging trap notifications
logging x.x.x.x

Note: Default for sending log messages to the syslog server is informational (level 6); hence, the command logging trap informational will not be seen in the configuration. Level of log messages sent to the syslog server can be verified using the show logging command.

If the switch is not configured to send log data to the syslog server, this is a finding.

Fix Text (F-22272r508649_fix)
Configure the switch to send log messages to the syslog server as shown in the example below: SW4(config)#logging host x.x.x.x SW4(config)#logging trap notifications