The Cisco router must be configured to produce audit records containing information to establish where the events occurred.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-216659	CISC-RT-000210	SV-216659r531086_rule		Medium

Description
Without establishing where events occurred, it is impossible to establish, correlate, and investigate the events leading up to an outage or attack. In order to compile an accurate risk assessment and provide forensic analysis, it is essential for security personnel to know where events occurred, such as router components, modules, device identifiers, node names, and functionality. Associating information about where the event occurred within the network provides a means of investigating an attack, recognizing resource utilization or capacity thresholds, or identifying an improperly configured router.

Description

Without establishing where events occurred, it is impossible to establish, correlate, and investigate the events leading up to an outage or attack. In order to compile an accurate risk assessment and provide forensic analysis, it is essential for security personnel to know where events occurred, such as router components, modules, device identifiers, node names, and functionality. Associating information about where the event occurred within the network provides a means of investigating an attack, recognizing resource utilization or capacity thresholds, or identifying an improperly configured router.

STIG	Date
Cisco IOS XE Router RTR Security Technical Implementation Guide	2023-02-28

Details

Check Text ( C-17892r287934_chk )
Review the router configuration to verify that events are logged containing information to establish where the events occurred as shown in the example below: ip access-list extended INGRESS_FILTER permit tcp any any established permit tcp host x.11.1.1 eq bgp host x.11.1.2 permit tcp host x.11.1.1 host x.11.1.2 eq bgp permit tcp any host x.11.1.5 eq www permit icmp host x.11.1.1 host x.11.1.2 echo permit icmp any any echo-reply … … … deny ip any any log-input Note: When the log-input parameter is configured on deny statements, the log record will contain the interface where ingress packet has been dropped. If the router is not configured to produce audit records containing information to establish to establish where the events occurred, this is a finding.

Check Text ( C-17892r287934_chk )

Review the router configuration to verify that events are logged containing information to establish where the events occurred as shown in the example below:

ip access-list extended INGRESS_FILTER
permit tcp any any established
permit tcp host x.11.1.1 eq bgp host x.11.1.2
permit tcp host x.11.1.1 host x.11.1.2 eq bgp
permit tcp any host x.11.1.5 eq www
permit icmp host x.11.1.1 host x.11.1.2 echo
permit icmp any any echo-reply
…
…
…
deny ip any any log-input

Note: When the log-input parameter is configured on deny statements, the log record will contain the interface where ingress packet has been dropped.

If the router is not configured to produce audit records containing information to establish to establish where the events occurred, this is a finding.

Fix Text (F-17890r287935_fix)
Configure the router to log events containing information to establish where the events occurred as shown in the example below: R5(config)#ip access-list extended INGRESS_FILTER … … … R5(config-ext-nacl)#deny ip any any log-input