Finding ID | Version | Rule ID | IA Controls | Severity |
---|---|---|---|---|
V-216728 | CISC-RT-000900 | SV-216728r531086_rule | Medium |
Description |
---|
MSDP peering with customer network routers presents additional risks to the DISN Core, whether from a rogue or misconfigured MSDP-enabled router. To guard against an attack from malicious MSDP traffic, the receive path or interface filter for all MSDP-enabled RP routers must be configured to only accept MSDP packets from known MSDP peers. |
STIG | Date |
---|---|
Cisco IOS XE Router RTR Security Technical Implementation Guide | 2021-03-26 |
Check Text ( C-17961r288126_chk ) |
---|
Review the router configuration to determine if there is a receive path or interface filter to only accept MSDP packets from known MSDP peers. Step 1: Verify that interfaces used for MSDP peering have an inbound ACL as shown in the example. interface GigabitEthernet1/1 ip address x.1.28.8 255.255.255.0 ip access-group EXTERNAL_ACL_INBOUND in ip pim sparse-mode Step 2: Verify that the ACL restricts MSDP peering to only known sources. ip access-list extended EXTERNAL_ACL_INBOUND permit tcp any any established permit tcp host x.1.28.2 host x.1.28.8 eq 639 deny tcp any host x.1.28.8 eq 639 log permit tcp host x.1.28.2 host 10.1.28.8 eq bgp permit tcp host x.1.28.2 eq bgp host x.1.28.8 permit pim host x.1.28.2 pim host x.1.28.8 … … … deny ip any any log Note: MSDP connections is via TCP port 639. If the router is not configured to only accept MSDP packets from known MSDP peers, this is a finding. |
Fix Text (F-17959r288127_fix) |
---|
Configure the receive path or interface ACLs to only accept MSDP packets from known MSDP peers. R8(config)#ip access-list extended EXTERNAL_ACL_INBOUND R8(config-ext-nacl)#permit tcp any any established R8(config-ext-nacl)#permit tcp host x.1.28.2 host x.1.28.8 eq 639 R8(config-ext-nacl)#deny tcp any host x1.28.8 eq 639 R8(config-ext-nacl)#permit tcp host x.1.28.2 host x.1.28.8 eq bgp R8(config-ext-nacl)#permit tcp host x.1.28.2 eq bgp host x.1.28.8 R8(config-ext-nacl)#permit pim host x.1.28.2 host x.1.28.8 … … … R8(config-ext-nacl)#deny ip any any |