Changes are coming to https://stigviewer.com.
Take our survey to help us understand your usage and how we can better serve you in the future.
Take Survey
The Cisco router must be configured to only permit management traffic that ingresses and egresses the out-of-band management (OOBM) interface.
Overview
| Finding ID | Version | Rule ID | IA Controls | Severity |
|---|---|---|---|---|
| V-216683 | CISC-RT-000450 | SV-216683r531086_rule | Medium |
| Description |
|---|
| The OOBM access switch will connect to the management interface of the managed network elements. The management interface can be a true OOBM interface or a standard interface functioning as the management interface. In either case, the management interface of the managed network element will be directly connected to the OOBM network. An OOBM interface does not forward transit traffic, thereby providing complete separation of production and management traffic. Since all management traffic is immediately forwarded into the management network, it is not exposed to possible tampering. The separation also ensures that congestion or failures in the managed network do not affect the management of the device. If the device does not have an OOBM port, the interface functioning as the management interface must be configured so that management traffic does not leak into the managed network and that production traffic does not leak into the management network. |
| STIG | Date |
|---|---|
| Cisco IOS XE Router RTR Security Technical Implementation Guide | 2021-03-26 |
Details
| Check Text ( C-17916r288000_chk ) |
|---|
| This requirement is only applicable where management access to the router is via an OOBM interface which is not a true OOBM interface. Step 1: Verify that the managed interface has an inbound and outbound ACL configured. interface GigabitEthernet0/7 description link to OOBM access switch ip address 10.11.1.22 255.255.255.0 ip access-group INGRESS_MANAGEMENT_ACL in ip access-group EGRESS_MANAGEMENT_ACL out Step 2: Verify that the ingress ACL only allows management and ICMP traffic. ip access-list extended INGRESS_MANAGEMENT_ACL permit tcp any host 10.11.1.22 eq tacacs permit tcp any host 10.11.1.22 eq 22 permit udp any host 10.11.1.22 eq snmp permit udp any host 10.11.1.22 eq snmptrap permit udp any host 10.11.1.22 eq ntp permit icmp any host 10.11.1.22 deny ip any any log-input Step 3: Verify that the egress ACL blocks any transit traffic. ip access-list extended EGRESS_MANAGEMENT_ACL deny ip any any log-input Note: On Cisco routers, local generated packets are not inspected by outgoing interface access-lists. Hence, the above configuration would simply drop any packets not generated by the router; hence, blocking any transit traffic. If the router does not restrict traffic that ingresses and egresses the management interface, this is a finding. |
| Fix Text (F-17914r288001_fix) |
|---|
| If the management interface is not a dedicated OOBM interface, it must be configured with both an ingress and egress ACL. Step 1: Configure an ingress ACL a shown in the example below: R5(config)#ip access-list extended INGRESS_MANAGEMENT_ACL R5(config-ext-nacl)#permit tcp any host 10.11.1.22 eq tacacs R5(config-ext-nacl)#permit tcp any host 10.11.1.22 eq 22 R5(config-ext-nacl)#permit udp any host 10.11.1.22 eq snmp R5(config-ext-nacl)#permit udp any host 10.11.1.22 eq snmptrap R5(config-ext-nacl)#permit udp any host 10.11.1.22 eq ntp R5(config-ext-nacl)#permit icmp any host 10.11.1.22 R5(config-ext-nacl)#deny ip any any log-input R5(config-ext-nacl)#exit Step 2: Configure an egress ACL a shown in the example below: R5(config)#ip access-list extended EGRESS_MANAGEMENT_ACL R5(config-ext-nacl)#deny ip any any log-input R5(config-ext-nacl)#exit Step 3: Apply the ACLs to the OOBM interfaces. R4(config)#int g0/7 R4(config-if)#ip access-group INGRESS_MANAGEMENT_ACL in R4(config-if)#ip access-group EGRESS_MANAGEMENT_ACL out |