Finding ID | Version | Rule ID | IA Controls | Severity |
---|---|---|---|---|
V-96963 | CISC-RT-000570 | SV-106101r1_rule | Low |
Description |
---|
The effects of prefix de-aggregation can degrade router performance due to the size of routing tables and also result in black-holing legitimate traffic. Initiated by an attacker or a misconfigured router, prefix de-aggregation occurs when the announcement of a large prefix is fragmented into a collection of smaller prefix announcements. |
STIG | Date |
---|---|
Cisco IOS XE Router RTR Security Technical Implementation Guide | 2019-07-25 |
Check Text ( C-95799r1_chk ) |
---|
This requirement is not applicable for the DODIN Backbone. Review the router configuration to determine if it is compliant with this requirement. Step 1: Verify that a route filter has been configured to reject prefixes longer than /24, or the least significant prefixes issued to the customers as shown in the example below: ip prefix-list FILTER_PREFIX_LENGTH seq 5 permit 0.0.0.0/0 ge 8 le 24 ip prefix-list FILTER_PREFIX_LENGTH seq 10 deny 0.0.0.0/0 le 32 Step 2: Verify that prefix filtering has been applied to each eBGP peer as shown in the example: router bgp xx neighbor x.1.1.9 remote-as yy neighbor x.1.1.9 FILTER_PREFIX_LENGTH nnnnnnn neighbor x.2.1.7 remote-as zz neighbor x.2.1.7 FILTER_PREFIX_LENGTH nnnnnnn If the router is not configured to limit the prefix size on any inbound route advertisement to /24, or the least significant prefixes issued to the customer, this is a finding. |
Fix Text (F-102643r1_fix) |
---|
This requirement is not applicable for the DODIN Backbone. Configure the router to limit the prefix size on any route advertisement to /24 or the least significant prefixes issued to the customer. Step 1: Configure a prefix list to reject any prefix that is longer than /24. R1(config)#ip prefix-list FILTER_LENGTH permit 0.0.0.0/0 ge 8 le 24 R1(config)#ip prefix-list FILTER_LENGTH deny 0.0.0.0/0 le 32 Step 2: Apply the prefix list to all eBGP peers as shown in the example below. R1(config)#router bgp xx R1(config-router)#neighbor x.1.1.9 prefix-list FILTER_PREFIX_LENGTH in R1(config-router)#neighbor x.2.1.7 prefix-list FILTER_PREFIX_LENGTH in |