UCF STIG Viewer Logo

The Cisco router must be configured to automatically audit account disabling actions.


Finding ID Version Rule ID IA Controls Severity
V-96201 CISC-ND-000110 SV-105339r1_rule Medium
Account management, as a whole, ensures access to the network device is being controlled in a secure manner by granting access to only authorized personnel. Auditing account disabling actions will support account management procedures. When device management accounts are disabled, user or service accessibility may be affected. Auditing also ensures authorized active accounts remain enabled and available for use when required.
Cisco IOS XE Router NDM Security Technical Implementation Guide 2019-12-20


Check Text ( C-95033r1_chk )
Review the router configuration to determine if it automatically audits account disabling. The configuration should look similar to the example below:

log config
logging enable

Note: Configuration changes can be viewed using the show archive log config all command.

If account disabling is not automatically audited, this is a finding.
Fix Text (F-101877r1_fix)
Configure the router to log account disabling using the following commands:

R4(config-archive)#log config
R4(config-archive-log-cfg)#logging enable