The Cisco router must be configured to send SNMP traps and notifications to the SNMP manager for the purpose of sending alarms and notifying appropriate personnel as required by specific events.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-96367	CISC-ND-001460	SV-105505r1_rule		Medium

Description
If appropriate actions are not taken when a network device failure occurs, a denial of service condition may occur which could result in mission failure since the network would be operating without a critical security monitoring and prevention function. Upon detecting a failure of any router components, the router must activate a system alert message, send an alarm, or shut down. By immediately displaying an alarm message, potential security violations can be identified more quickly even when administrators are not logged into the device. This can be facilitated by the router sending SNMP traps to the SNMP manager that can then have the necessary action taken by automatic or operator intervention.

Description

If appropriate actions are not taken when a network device failure occurs, a denial of service condition may occur which could result in mission failure since the network would be operating without a critical security monitoring and prevention function. Upon detecting a failure of any router components, the router must activate a system alert message, send an alarm, or shut down. By immediately displaying an alarm message, potential security violations can be identified more quickly even when administrators are not logged into the device. This can be facilitated by the router sending SNMP traps to the SNMP manager that can then have the necessary action taken by automatic or operator intervention.

STIG	Date
Cisco IOS XE Router NDM Security Technical Implementation Guide	2019-07-25

Details

Check Text ( C-95203r1_chk )
Verify that the router is configured to send traps to the SNMP manager. The SNMP configuration should contain commands similar to the example below. snmp-server enable traps snmp authentication linkdown linkup coldstart warmstart snmp-server enable traps vrrp snmp-server enable traps eigrp snmp-server enable traps cpu threshold … … … snmp-server enable traps ipsec cryptomap add snmp-server enable traps ipsec cryptomap delete snmp-server enable traps ipsec cryptomap attach snmp-server enable traps ipsec cryptomap detach snmp-server enable traps ipsec tunnel start snmp-server enable traps ipsec tunnel stop snmp-server host x.x.x.x version 3 auth xxxxx Note: The above is a subset of all the possible traps that can be enabled. Selective traps can be enabled as required. If the router is not configured to send traps to the SNMP manager, this is a finding.

Check Text ( C-95203r1_chk )

Verify that the router is configured to send traps to the SNMP manager. The SNMP configuration should contain commands similar to the example below.

snmp-server enable traps snmp authentication linkdown linkup coldstart warmstart
snmp-server enable traps vrrp
snmp-server enable traps eigrp
snmp-server enable traps cpu threshold
…
…
…
snmp-server enable traps ipsec cryptomap add
snmp-server enable traps ipsec cryptomap delete
snmp-server enable traps ipsec cryptomap attach
snmp-server enable traps ipsec cryptomap detach
snmp-server enable traps ipsec tunnel start
snmp-server enable traps ipsec tunnel stop
snmp-server host x.x.x.x version 3 auth xxxxx

Note: The above is a subset of all the possible traps that can be enabled. Selective traps can be enabled as required.

If the router is not configured to send traps to the SNMP manager, this is a finding.

Fix Text (F-102043r1_fix)
Configure the router to send SNMP traps to the SNMP manager. R4(config)#snmp-server enable traps R4(config)#snmp-server host x.x.x.x version 3 auth xxxxx The above command will enable all possible traps and is not necessary—selective set of traps can be enabled as required.