The Cisco switch must be configured to log all packets that have been dropped at interfaces via an access control list (ACL).

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-220436	CISC-RT-000200	SV-220436r622190_rule		Low

Description
Auditing and logging are key components of any security architecture. It is essential for security personnel to know what is being done or attempted to be done, and by whom, to compile an accurate risk assessment. Auditing the actions on network devices provides a means to recreate an attack or identify a configuration mistake on the device.

STIG	Date
Cisco IOS Switch RTR Security Technical Implementation Guide	2022-09-14

Details

Check Text ( C-22151r508393_chk )

Review all ACLs used to filter traffic and verify that packets being dropped at interfaces via an ACL are logged as shown in the configuration below: ip access-list extended INGRESS_FILTER permit tcp any any established permit tcp any host x.11.1.5 eq www permit icmp host x.11.1.1 host x.11.1.2 echo permit icmp any any echo-reply … … … deny ip any any log If packets being dropped are not logged, this is a finding.

Fix Text (F-22140r508394_fix)
Configure ACLs to log packets that are dropped as shown in the example below: SW1(config)#ip access-list extended INGRESS_FILTER … … … SW1(config-ext-nacl)#deny ip any any log