The Cisco switch must be configured to produce audit records containing information to establish where the events occurred.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-220437	CISC-RT-000210	SV-220437r622190_rule		Medium

Description
Without establishing where events occurred, it is impossible to establish, correlate, and investigate the events leading up to an outage or attack. To compile an accurate risk assessment and provide forensic analysis, it is essential for security personnel to know where events occurred, such as switch components, modules, device identifiers, node names, and functionality. Associating information about where the event occurred within the network provides a means of investigating an attack, recognizing resource utilization or capacity thresholds, or identifying an improperly configured switch.

Description

Without establishing where events occurred, it is impossible to establish, correlate, and investigate the events leading up to an outage or attack. To compile an accurate risk assessment and provide forensic analysis, it is essential for security personnel to know where events occurred, such as switch components, modules, device identifiers, node names, and functionality. Associating information about where the event occurred within the network provides a means of investigating an attack, recognizing resource utilization or capacity thresholds, or identifying an improperly configured switch.

STIG	Date
Cisco IOS Switch RTR Security Technical Implementation Guide	2021-03-19

Details

Check Text ( C-22152r508396_chk )
Review the switch configuration to verify that events are logged containing information to establish where the events occurred as shown in the example below: ip access-list extended INGRESS_FILTER permit tcp any any established permit tcp any host x.11.1.5 eq www permit icmp host x.11.1.1 host x.11.1.2 echo permit icmp any any echo-reply … … … deny ip any any log-input Note: When the log-input parameter is configured on deny statements, the log record will contain the interface where the ingress packet has been dropped. If the switch is not configured to produce audit records containing information to establish to establish where the events occurred, this is a finding.

Check Text ( C-22152r508396_chk )

Review the switch configuration to verify that events are logged containing information to establish where the events occurred as shown in the example below:

ip access-list extended INGRESS_FILTER
permit tcp any any established
permit tcp any host x.11.1.5 eq www
permit icmp host x.11.1.1 host x.11.1.2 echo
permit icmp any any echo-reply
…
…
…
deny ip any any log-input

Note: When the log-input parameter is configured on deny statements, the log record will contain the interface where the ingress packet has been dropped.

If the switch is not configured to produce audit records containing information to establish to establish where the events occurred, this is a finding.

Fix Text (F-22141r508397_fix)
Configure the switch to log events containing information to establish where the events occurred as shown in the example below: SW1(config)#ip access-list extended INGRESS_FILTER … … … SW1(config-ext-nacl)#deny ip any any log-input