Finding ID | Version | Rule ID | IA Controls | Severity |
---|---|---|---|---|
V-220601 | CISC-ND-001030 | SV-220601r991869_rule | Medium |
Description |
---|
The loss of connectivity to a particular authoritative time source will result in the loss of time synchronization (free-run mode) and increasingly inaccurate time stamps on audit events and other functions. Multiple time sources provide redundancy by including a secondary source. Time synchronization is usually a hierarchy; clients synchronize time to a local source while that source synchronizes its time to a more accurate source. The network device must use an authoritative time server and/or be configured to use redundant authoritative time sources. This requirement is related to the comparison done in CCI-001891. DOD-approved solutions consist of a combination of a primary and secondary time source using a combination or multiple instances of the following: a time server designated for the appropriate DOD network (NIPRNet/SIPRNet); United States Naval Observatory (USNO) time servers; and/or the Global Positioning System (GPS). The secondary time source must be located in a different geographic region than the primary time source. |
STIG | Date |
---|---|
Cisco IOS Switch NDM Security Technical Implementation Guide | 2024-06-10 |
Check Text ( C-22316r507849_chk ) |
---|
Review the Cisco switch configuration to verify that it synchronizes its clock with redundant authoritative time sources as shown in the example below: ntp server x.x.x.x ntp server y.y.y.y If the Cisco switch is not configured to synchronize its clock with redundant authoritative time sources, this is a finding. |
Fix Text (F-22305r507850_fix) |
---|
Configure the Cisco switch to synchronize its clock with redundant authoritative time sources as shown in the example below: SW2(config)#ntp server x.x.x.x SW2(config)#ntp server y.y.y.y |