The Cisco switch must be configured to generate an alert for all audit failure events.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-220600	CISC-ND-001000	SV-220600r879733_rule		Medium

Description
It is critical for the appropriate personnel to be aware if a system is at risk of failing to process audit logs as required. Without a real-time alert, security personnel may be unaware of an impending failure of the audit capability and system operation may be adversely affected. Alerts provide organizations with urgent messages. Real-time alerts provide these messages immediately (i.e., the time from event detection to alert occurs in seconds or less).

Description

It is critical for the appropriate personnel to be aware if a system is at risk of failing to process audit logs as required. Without a real-time alert, security personnel may be unaware of an impending failure of the audit capability and system operation may be adversely affected. Alerts provide organizations with urgent messages. Real-time alerts provide these messages immediately (i.e., the time from event detection to alert occurs in seconds or less).

STIG	Date
Cisco IOS Switch NDM Security Technical Implementation Guide	2023-11-28

Details

Check Text ( C-22315r835081_chk )
Review the Cisco switch configuration to verify that it generates an alert for all audit failure events as shown in the example below: logging trap critical Note: The parameter "critical" can replaced with a lesser severity level (i.e., error, warning, notice, informational). Informational is the default severity level; hence, if the severity level is configured to informational, the logging trap command will not be shown in the configuration. If the Cisco switch is not configured to generate an alert for all audit failure events, this is a finding.

Check Text ( C-22315r835081_chk )

Review the Cisco switch configuration to verify that it generates an alert for all audit failure events as shown in the example below:

logging trap critical

Note: The parameter "critical" can replaced with a lesser severity level (i.e., error, warning, notice, informational). Informational is the default severity level; hence, if the severity level is configured to informational, the logging trap command will not be shown in the configuration.

If the Cisco switch is not configured to generate an alert for all audit failure events, this is a finding.

Fix Text (F-22304r835082_fix)
Configure the Cisco switch to send critical to emergency log messages to the syslog server as shown in the example below: SW4(config)#logging trap critical Note: The parameter "critical" can replaced with a lesser severity level (i.e., error, warning, notice, informational).