The Cisco switch must be configured to automatically audit account disabling actions.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-220573	CISC-ND-000110	SV-220573r879527_rule		Medium

Description
Account management, as a whole, ensures access to the network device is being controlled in a secure manner by granting access to only authorized personnel. Auditing account disabling actions will support account management procedures. When device management accounts are disabled, user or service accessibility may be affected. Auditing also ensures authorized active accounts remain enabled and available for use when required.

Description

Account management, as a whole, ensures access to the network device is being controlled in a secure manner by granting access to only authorized personnel. Auditing account disabling actions will support account management procedures. When device management accounts are disabled, user or service accessibility may be affected. Auditing also ensures authorized active accounts remain enabled and available for use when required.

STIG	Date
Cisco IOS Switch NDM Security Technical Implementation Guide	2023-05-05

Details

Check Text ( C-22288r507765_chk )
Review the switch configuration to determine if it automatically audits account disabling. The configuration should look similar to the example below: archive log config logging enable Note: Configuration changes can be viewed using the show archive log config all command. If account disabling is not automatically audited, this is a finding.

Fix Text (F-22277r507766_fix)
Configure the switch to log account disabling using the following commands: SW4(config)#archive SW4(config-archive)#log config SW4(config-archive-log-cfg)#logging enable SW4(config-archive-log-cfg)#end