The Cisco switch must be configured to audit the execution of privileged functions.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-220598	CISC-ND-000940	SV-220598r521267_rule		Medium

Description
Misuse of privileged functions, either intentionally or unintentionally by authorized users, or by unauthorized external entities that have compromised information system accounts, is a serious and ongoing concern and can have significant adverse impacts on organizations. Auditing the use of privileged functions is one way to detect such misuse and identify the risk from insider threats and the advanced persistent threat.

Description

Misuse of privileged functions, either intentionally or unintentionally by authorized users, or by unauthorized external entities that have compromised information system accounts, is a serious and ongoing concern and can have significant adverse impacts on organizations. Auditing the use of privileged functions is one way to detect such misuse and identify the risk from insider threats and the advanced persistent threat.

STIG	Date
Cisco IOS Switch NDM Security Technical Implementation Guide	2021-06-02

Details

Check Text ( C-22313r507840_chk )
Review the Cisco switch configuration to verify that it is compliant with this requirement. The configuration example below will log all commands entered from the command line interface as well as all configuration changes: hostname R1 ! logging userinfo ! … … … archive log config logging enable ! Note: The logging userinfo global configuration command will generate a log when a user increases his or her privilege level. If the Cisco switch is not configured to log all commands entered from the command line interface as well as all configuration changes, this is a finding.

Check Text ( C-22313r507840_chk )

Review the Cisco switch configuration to verify that it is compliant with this requirement. The configuration example below will log all commands entered from the command line interface as well as all configuration changes:

hostname R1
!
logging userinfo
!
…
…
…
archive
log config
logging enable
!

Note: The logging userinfo global configuration command will generate a log when a user increases his or her privilege level.

If the Cisco switch is not configured to log all commands entered from the command line interface as well as all configuration changes, this is a finding.

Fix Text (F-22302r507841_fix)
Configure the Cisco switch to log all commands entered from the command line interface as well as all configuration changes as shown in the example below: SW1(config)#logging userinfo SW1(config)#archive SW1(config-archive)#log config SW1(config-archive-log-cfg)#logging enable SW1(config-archive-log-cfg)#end