The Cisco switch must have IP Source Guard enabled on all user-facing or untrusted access switch ports.

Overview

Finding ID	Version	Rule ID	IA Controls	Severity
V-220634	CISC-L2-000140	SV-220634r863245_rule		Medium

Description
IP Source Guard provides source IP address filtering on a Layer 2 port to prevent a malicious host from impersonating a legitimate host by assuming the legitimate host's IP address. The feature uses dynamic DHCP snooping and static IP source binding to match IP addresses to hosts on untrusted Layer 2 access ports. Initially, all IP traffic on the protected port is blocked except for DHCP packets. After a client receives an IP address from the DHCP server, or after static IP source binding is configured by the administrator, all traffic with that IP source address is permitted from that client. Traffic from other hosts is denied. This filtering limits a host's ability to attack the network by claiming a neighbor host's IP address.

Description

IP Source Guard provides source IP address filtering on a Layer 2 port to prevent a malicious host from impersonating a legitimate host by assuming the legitimate host's IP address. The feature uses dynamic DHCP snooping and static IP source binding to match IP addresses to hosts on untrusted Layer 2 access ports. Initially, all IP traffic on the protected port is blocked except for DHCP packets. After a client receives an IP address from the DHCP server, or after static IP source binding is configured by the administrator, all traffic with that IP source address is permitted from that client. Traffic from other hosts is denied. This filtering limits a host's ability to attack the network by claiming a neighbor host's IP address.

STIG	Date
Cisco IOS Switch L2S Security Technical Implementation Guide	2022-09-12

Details

Check Text ( C-22349r863244_chk )
NOTE: For VLANs managed via 802.1x, this check is N/A. Review the switch configuration to verify that IP Source Guard is enabled on all user-facing or untrusted access switch ports as shown in the example below: interface GigabitEthernet0/0 ip verify source ! interface GigabitEthernet0/1 ip verify source … … … interface GigabitEthernet0/9 ip verify source Note: The IP Source Guard feature depends on the entries in the DHCP snooping database or static IP-MAC-VLAN configuration commands to verify IP-to-MAC address bindings. If the switch does not have IP Source Guard enabled on all untrusted access switch ports, this is a finding.

Check Text ( C-22349r863244_chk )

NOTE: For VLANs managed via 802.1x, this check is N/A.

Review the switch configuration to verify that IP Source Guard is enabled on all user-facing or untrusted access switch ports as shown in the example below:

interface GigabitEthernet0/0
ip verify source
!
interface GigabitEthernet0/1
ip verify source
…
…
…
interface GigabitEthernet0/9
ip verify source

Note: The IP Source Guard feature depends on the entries in the DHCP snooping database or static IP-MAC-VLAN configuration commands to verify IP-to-MAC address bindings.

If the switch does not have IP Source Guard enabled on all untrusted access switch ports, this is a finding.

Fix Text (F-22338r507949_fix)
Configure the switch to have IP Source Guard enabled on all user-facing or untrusted access switch ports: SW2(config)#int range g0/0 - 9 SW2(config-if-range)#ip verify source